User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Controlling the display with Display Pilot (XL2411 only)
- Initial setup for playing games
- Picture optimization (XL2411 only)
- Customizing the hot keys
- Setting up your own game mode
- Downloading more game modes using Game Mode Loader (XL2411 only)
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Navigating the main menu
- Troubleshooting
15 How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Release the thumbscrew on the bottom of
the monitor base and detach the monitor
base as illustrated.
1
2