Manual

39
Activating VESA standard DisplayPort Adaptive-Sync (XL2540K /
XL2546K)
Monitors featuring with the VESA standard Adaptive-Sync will eliminate screen tearing, stuttering, and
juddering during gaming.
1. Use a compatible graphics processing units (GPU) with the forthcoming driver. Confirm supported
technologies please visit www.AMD.com.
2. Ensure to connect with DisplayPort or HDMI 2.0 socket
(*)
. See Connect the video cable. on page 14
for more information.
3. Go to System > FreeSync Premium to turn on the function. Pay attention to the on-screen
messages before the function switch.
Using Scaling
You can resize your display by Scaling.
1. Press the 5-way controller to bring up the Quick Menu.
2. Go to Menu > Display > Scaling.
Initial setup for playing games at 144 / 240 Hz
You can optimize the monitor to enhance your gaming experience. You might want to start with the
following steps.
1. Set the screen refresh rate to 144 Hertz (144 Hz) / 240 Hertz (240 Hz). Right-click the desktop
and select Screen resolution. Click Advanced settings. Under the Monitor tab, change the
screen refresh rate to 144 Hertz / 240 Hertz. And then click Apply and Yes to confirm the
change.
• For any questions related to Adaptive-Sync performance please refer to www.AMD.com.
•
(*)
: HDMI 2.0 ports support AMD FreeSync™ Premium only.
Your display may become unstable temporarily when being resized. This is a normal phenomenon and should not be
considered as manufacturing defect.
Below is a list of maximum refresh rate and its supported models.
• 144 Hz: XL2411K
• 240 Hz: XL2540K / XL2546K
Available timings vary by model and input source. Download Resolution file from the website (see Product support
on page 3). Refer to "Preset display modes" in Resolution file for more information.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen refresh
rate. Refer to the Help document of your operating system for details.