User Manual

11 How to assemble your monitor hardware
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may
vary depending on the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean
padded surface.
Attach the monitor stand to the monitor base as
illustrated. Make sure to align the arrow on the end
of the stand to the one on the monitor base.
Turn the stand clockwise until you cannot go
further.