User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Setting up your own game mode
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync
- Enabling color vision accessibility (Color Weakness)
- Navigating the main menu
- Troubleshooting
14 How to assemble your monitor hardware
2. Connect the PC video cable.
The video cables included in your package and the socket illustrations in this document may vary depending on
the product supplied for your region.
1. Establish a video cable connection.
• Connect the plug of the DVI-D Dual Link cable to the monitor video socket.
• Connect the plug of the HDMI cable to the HDMI port on the monitor.
• Connect the plug of the DP cable to the monitor video socket.
2. Connect the other end of the cable to the computer video socket.
3. Tighten all finger screws (if available) to prevent the plugs from accidently falling out during use.
3. Connect the headphones.
You may connect headphones to the headphone jack found on the back side of the monitor.
The headphone jacks work only when the audio source is HDMI or DisplayPort.
The audio source may not work on headphone jack under certain resolution (2560 x 1440, 144Hz) due to the
graphic limitation on some of the graphic cards.
or or or