User Guide

Table Of Contents

13 How to assemble your monitor hardware

Turn the base counterclockwise until you cannot

go further.

Raise the thumbscrew lid ( ) and tighten the

thumbscrew as illustrated ( ). Then push the lid

back.

Carefully put down the stand and the base.

Gently attempt to pull the stand and the base back

apart to check that they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

To move the monitor, you must hold the handle and the

bottom of the stand base at the same time as illustrated. You

can protect the monitor using the supplied protective cover.

Open

Lock

ock

Open

Lock

Open

Lock