User Guide
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ ZOWIE monitor
- How to adjust your monitor
- The control panel
- The S Switch
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Adjusting Dynamic Accuracy (selected models only)
- Setting up your own game mode
- Working with game mode to go by S Switch
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync (XL2540 only)
- Navigating the main menu
- Troubleshooting
14 How to assemble your monitor hardware
You might want to adjust the monitor stand height.
See Adjusting the monitor height on page 20 for
more information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable.
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to
the monitor video socket. Connect the other end
of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
Either
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI
port on the monitor. Connect the other end of the
cable to the HDMI port of a digital output device.
Or