User Guide
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ ZOWIE monitor
- How to adjust your monitor
- The control panel
- The S Switch
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Adjusting Dynamic Accuracy (selected models only)
- Setting up your own game mode
- Working with game mode to go by S Switch
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync (XL2540 only)
- Navigating the main menu
- Troubleshooting
16 How to assemble your monitor hardware
You may connect the headphones to the headphone jack
found on the left side of the monitor.
5. Using the headphone hook.
Push to release the headphone hook found on the
left side of the monitor ( ). And pull out the
headphone hook ( ).
Leave your headset on the headphone hook if
needed.
The maximum load capacity of the headphone hook is 400g.
6. Connect USB devices.
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back).
This upstream USB port transmits data between
the PC and the USB devices connected to the
monitor.
Connect USB devices via other USB ports
(downstream) on the monitor. These downstream
USB ports transmit data between connected USB
devices and the upstream port.
See picture on the right.
1
2
TV OUT
PDIF-OUT
SD
I
F-OUT