User Guide
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ ZOWIE monitor
- How to adjust your monitor
- The control panel
- The S Switch
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Adjusting Dynamic Accuracy (selected models only)
- Setting up your own game mode
- Working with game mode to go by S Switch
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync (XL2540 only)
- Navigating the main menu
- Troubleshooting
20 How to assemble your monitor hardware
Adjusting the monitor height
1. To adjust the monitor height, hold both the left and
the right sides of the monitor to lower the monitor
or lift it up to the desired height.
2. On the monitor stand is an adjustment scale that
helps keep track of your preferred monitor height.
Move the marker on the scale to the monitor
stand height just set.
• Avoid placing hands on the upper or lower part of the
height-adjustable stand or at the bottom of the monitor, as
ascending or descending monitor might cause personal injuries.
Keep children out of reach of the monitor while performing this
operation.
• If the monitor has been rotated to portrait mode and height adjustment is desired, you
should be noted that the wide screen will keep the monitor from being lowered to its
minimum height.