User Guide

Table Of Contents

24 How to assemble your monitor hardware

Installing the Shield (shading hood)

To help focusing in games, the Shield (shading hood) avoids the unwanted disturbance interfered

with the peripheral vision while playing.

Two shading hoods are inside the accessory box. Please be careful to prevent damage to the

Shield and the monitor. The shading hoods are well-designed and can fit into your monitor

properly. Do not use excessive force when installing Shield to avoid possible damage.

1. Prepare for the shield installation.

Place the monitor upright on its stand on a flat

even surface. Make sure the monitor is rotated to

the landscape mode.

2. Remove the stickers and the rubbers on

both sides of the monitor.

There are 2 screw holes protected by rubbers and

stickers on each of the right and the left side of the

monitor. Remove the stickers and the rubbers

before shading hood installation.

Keep the rubbers and insert them back to the holes if Shield

has been removed.

3. Attach the Shield to the monitor.

Two shading hoods are not identical. The ZOWIE

logo should be facing outward on the upper

section. Attached the hoods by using a coin or a

flat-head screwdriver and push the screws into the

holes appropriately.