User Guide
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ ZOWIE monitor
- How to adjust your monitor
- The control panel
- The S Switch
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Adjusting Dynamic Accuracy (selected models only)
- Setting up your own game mode
- Working with game mode to go by S Switch
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync (XL2540 only)
- Navigating the main menu
- Troubleshooting
25 How to assemble your monitor hardware
Uninstalling the Shield
Please remove the hoods before move the monitor to different places.
4. Adjust the hoods to the desired angle.
1. Detach the Shield.
Release the screws that fix hoods to the monitor
by a flat-head screwdriver or a coin, and detach the
hoods.
2. Insert the rubbers back into the screw
holes.
Note there is one direction to insert the rubbers
back into the holes properly.
2
1
1