User Manual

ManualsBrandsBenro ManualsProfessional VideoS4 Video Head and AL Flip Lock Legs Kit

S4迷你型摄像云台

俯仰锁定钮

Tilt Lock Handle

快装板锁定钮

可滑动快装板安全钮

QR Plate Release Button

QR Plate Locking Handle

S4 Video Head

水平锁定钮

Pan Lock Handle

快装板

QR (Quick Release) Plate

水平仪

配1／4"&3／8"备用螺钉

把手

Pan Bar Handle

1/4 -20 & 3/8" Screws"

Bubble Level

1/4"-20 & 3/8" screw

把手

Pan Bar Handle

简体中文

使用方法:

置到平衡最优位置，保证了平衡位置的

广度。

快装板可实现水平移动+/-20mm,从0位

云台使用说明

快装板：（如图1所示）

本快装夹锁紧系统设计有安全保险装置

可防止因人为原因导致误操作而使器材

滑落。

云台俯仰调整（如图3所示）：

云台水平旋转及锁紧

（如图4所示）

：

快装板安装及锁紧和可滑动快装板安

全钮 (如图2所示)：

使用方法:

QR Plate: (See figure 1)

An included quick release plate makes

camera changes and transport easy. Each

QR plate comes with both a 1/4” & 3/8”

screw for your convenience. The unused

screw is stored on the underside of the

head.

QR Plate Mounting and Safety Release:

(See figure 2)

Loosen Quick Release Plate Lock Lever and

press the QR Safety Button to allow QR Plate

to be removed. Attach Plate to bottom of

Camera using the Mounting Screw then slide

back on to Head. Slide and position for best

balance and tighten QR Plate Lock Lever.

Tilt adjustment: (See figure 3)

A side mounted knob adjusts the tension of

the drag on front-rear. tilt movements. Rotate

to adjust with a camera mounted to find the

most appropriate setting.

Pan adjustment: (See figure 4)

A pan Drag/Lock Lever provides both Drag

and Locking control of horizontal head

movement.

NOTE: Pan bar handle can be mounted on

either side of head.