Spec sheet

DEALER BULLETIN #: B10 NEW BENRO VIDEO TRIPOD KITS & HEADS [PAGE 3] DATE: 7/01/15
BV4 Video Tripod Kit - Aluminum
The Benro A373FBV4H is a lightweight video tripod kit with professional stepped controls ideal for
camera setups up to 8.8 lb. The BV4 head is equipped with operator side controls which are located
on the left side of the head making it easy to adjust while operating the camera.
The 6-step counterbalance (steps 0-5) allows you to dial in the right amount of counterbalance for
each setup, which helps when changing lenses or adding accessories. The 4-step pan & tilt drag
controls offer a more professional style setup and help to repeat smooth movements. Two 3/8"
accessory mounts come in handy when needing to add a simple audio recorder or monitor. For
added versatility, the tie down stud is removable to convert the BV4 head to flat base mode for
mounting to a slider.
The 3 series stage, 3 section aluminum tripod legs incorporate a 75mm bowl, three leg angles for uneven
terrain and quick flip leg locks.
[CONTINUED]
Features & Benefits:
• 8.8 lb payload capacity
• 75mm bowl
• 3 series, 3 section aluminum solo tripod legs
• 6-step counterbalance (0-5)
• 4-step pan drag (0-3)
• 4-step tilt drag (0-3)
• Independent pan lock
• Independent tilt lock
• Illuminated bubble level
• Tilt range +90/-75
• 3/8" accessory mount (x2)
• Removable tie down stud to convert to flat
base head
• Includes 501/504PL compatible sliding QR13
plate
• Max height of 64.0 in / 162.6 cm
• Min height of 12.4 in / 31.5 cm
• Quick flip leg locks
• Rubber and spiked feet
• Case included
BV6 Video Tripod Kit - Aluminum
The Benro A373FBV6H is a lightweight video tripod kit with professional stepped controls ideal
for camera setups up to 13.2 lb. The BV6 head is equipped with operator side controls which
are located on the left side of the head making it easy to adjust while operating the camera.
The 8-step counterbalance (steps 0-7) allows you to dial in the right amount of counterbalance
for each setup that helps when changing lenses or adding accessories. The 4-step pan & tilt
drag controls offer a more professional style setup and help to repeat smooth movements.
Two 3/8" accessory mounts come in handy when needing to add a simple audio recorder or
monitor. For added versatility, the tie down stud is removable to convert the BV6 head to flat
base mode for mounting to a slider.
The 3 series stage, 3 section aluminum tripod legs incorporate a 75mm bowl, three leg angles for
uneven terrain and quick flip leg locks.