User's Manual

7. The MOGA Pivot App will take you step by step through
the entire pairing procedure. If your mobile device’s
Bluetooth is turned “OFF” the MOGA app will request
to turn your device’s Bluetooth “ON”.
NOTE: Use your touch screen while navigating in the
MOGA Pivot App. Once your game is launched; navigate
the screen with your MOGA Controller.
MOGA Pivot App
8. Once downloaded, you are now ready to explore the
MOGA Pivot App! For more information about finding,
downloading and playing game apps, visit:
PowerA.com/MOGA
9. When finished playing simply slide the MOGA Power
Switch to the “OFF” position to disconnect from your
mobile device.
NOTE: To save power, always turn the ON/OFF switch
to the OFF position when not in use.
NOTE: To unpair your MOGA Controller and/or add
another MOGA Controller always use the Pivot App. When
in “My Games”, select the “Settings” button (located
in the upper right status bar) and you will be taken
to the “add or remove” controllers section of the menu.
Sleep Mode
After 8-10 minutes of non-use MOGA enters a “sleep mode”
to save energy. To awaken the MOGA controller hold the
PowerA button for 3 seconds, or slide the main power
switch to “OFF” and then back to “ON”.
LED Indicators
Small LED
Solid Green LED: Indicates MOGA is powered “ON”
Power A (Pairing LED) Button
Flashing Blue LED: Indicates Pairing Mode, LED turns
“OFF” after 60 seconds or when paired
Solid Green LED: Indicates Paired, Green LED will turn
“OFF” after unit pairs
Flashing RED LED: Indicates the batteries are getting
low and should be replaced
Quick Single RED Flash: Indicates unit is entering
“sl e ep m od e”
Support
For support with your authentic PowerA product, please visit
PowerA.com/Support, email CustomerSupport@PowerA.
com or call [phone] Mon – Fri: 5:00am – 5:00pm PST.
2-Year Limited Warranty – Visit PowerA.com for details
and to register your product.
PowerA, the PowerA logo, Amplify Your Experience, MOGA
and the MOGA logo are trademarks of Bensussen Deutsch and
Associates, Inc. ™ and © Bensussen Deutsch and Associates, Inc.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by PowerA is under license.
All other trademarks are the property of their respective owners.
Troubleshooting
Q: Why won’t my MOGA Controller and device pair
to each other?
A: MOGA is compatible with Bluetooth enabled Android
2.3+ devices. To confirm the software version of your
Android device, see your device manufacturer’s manual.
For additional compatibility information visit
PowerA.com/MOGA.
Q: How can I tell if my MOGA Controller is connected
to my device?
A: The upper right hand corner of the My Games screen
will show the MOGA Controller status as either
connected or not connected.
There are no user serviceable parts on MOGA. Do not
attempt to open MOGA except to replace the batteries.
Operational Temperatures Warning
Do not expose MOGA to temperature extremes. MOGA
is meant to be stored and used in average temperatures
and should never be exposed to direct sunlight or freezing
temperatures for any length of time. Normal operating
and storage temperature range is 40F to 110F. Do not store
MOGA in direct sunlight or expose to water or other liquids.
Motion Warning
Playing video games can make your muscles, joints, skin or
eyes hurt. Follow these instructions to avoid problems such
as tendinitis, carpal tunnel syndrome, skin irritation
or eyestrain:
Avoid excessive play. Take a 10 to 15 minute break every
hour, even if you don’t think you need it. Parents should
monitor their children for appropriate play.