User's Guide

3. Apply a lower-strength thread locking compound to secure the Ranger Pro device to the
mounting stud or pad.
4. To improve high frequency response and reduce transverse vibration, apply a very light
amount of silicone grease to the base of the device.
5. Attach the device to the machine surface and tighten the
stud.
a. If using the M6x1 to M8x1.25 tri-axial alignment stud,
tighten the device using a torque wrench to 6Nm
(53in-lb) maximum.
b. For all other mounts, tighten the device to 6-7Nm
(53to62in-lb).
6. (Optional) Secure the device by passing a 1mm (.04 inch) lanyard (not provided by Bently
Nevada) through the fall protection hole in the base. Secure the lanyard to a suitable
retaining point.
36/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F