User's Guide
Table Of Contents
1. General Safety
1.1 Handling and Storing Considerations
Proper handling of components, best practices for system installation, and diligent inspection
procedures will prolong the service life of the system. Additionally, procedures for dealing with
system components that have been replaced are detailed below, to allow compliance with
regulations relating to electronic waste.
1.2 Personal Safety Warnings
Labels and markings are provided to guide the system integrator in the processes of choosing
appropriate interface equipment, determining safe use conditions, and identifying
recommended installation procedures. The format of these markings are governed by the
standards that dictate safe use and environmental compliance in a variety of regions and
regulated settings. More specific product safety warnings are described in Ranger Pro Warning,
Special Conditions and Additional Information Application Note (document 126M6550).
Potential Electrostatic Charge Hazard
WARNING
RISK OF PERSONAL INJURY OR EQUIPMENT DAMAGE.
Potential for electrostatic charge hazard.
l Electrostatic discharge could cause a spark that may ignite and cause an explosion. In
addition, electrostatic discharge could damage the product.
l Use extra caution during dry weather. Relative humidity less than 30% tends to multiply the
accumulation of static charges on any surface.
4/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F