User's Guide
Table Of Contents
1. Download the CFand firmware files from Bently Nevada technical support.
2. Verify that all Ranger Pro devices are provisioned, connected to the network, and joined to
the gateway.
3. In the Yokogawa Field Wireless Management Console, open Monitor.
4. Choose Tools > Firmware Download Manager. The Firmware Download Manager dialog
box is displayed.
5. Select the Sensor Firmware tab. Ranger Pro devices are listed.
6. Select the check box of the devices you want to upgrade.
7. Select Download Firmware. The Update Sensor Firmware dialog box is displayed.
8. Do not modify TSAP and Object ID default values. Click the Firmware file browse button.
The Open dialog box is displayed.
9. Navigate to the location of the firmware file. Select it and click Open. The Update Sensor
Firmware dialog box is displayed.
10. Click Start Download. When the download is complete, the Firmware Download Manager
dialog box is displayed and the node is highlighted Yellow.
11. In the Sensor Firmware tab, select the Yellow highlighted devices and click Apply. The
firmware upgrade is applied and the sensors are restarted.
12. Apply capabilities file .
13. Restart the device and verify the device status.
52/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F