User's Guide
Table Of Contents
Update Sensor Firmware Using WirelessHARTGateway
Use the Ranger Pro configuration software to update devices on an Emerson
WirelessHARTgateway.
Before you can update sensor firmware, be sure you have downloaded and added current
versions of the firmware to the application.
To update device firmware using a WirelessHARTon an Emerson WirelessHARTgateway:
1. Open Ranger Pro configuration software.
2. Select Network Manager > Gateways tab.
3. Select the Emerson gateway hosting the sensors you want to update.
4. Select the Firmware tab.
5. Select a valid firmware version and click Upgrade.
6. Select Network Manager > Sensors tab.
7. Update progress is displayed in the Firmware Version field. To cancel, right-click on
Firmware Version and select Cancel Firmware Upgrade. Canceling the upgrade may
take from 1-5 minutes.
8. Once complete, the Ranger Pro device automatically reboots. The version number
displayed in Firmware Version is updated.
9. When successful, you can clear the status message. Right-click on the status and click
Clear Firmware Upgrade Status.
54/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F