User's Guide
Table Of Contents
Troubleshooting Ranger Pro Devices
If a Ranger Pro Wireless Sensors fails, it may be due to a weak battery, environmental damage, or
even a blocked wireless connection.
To identify the status of a Ranger Pro device, see Diagnose Device Status.
6.5 Update Radio Firmware
Radio firmware is rarely modified. If required, you can request radio firmware files from Bently
Nevada technical support.
Ranger Pro ISA100 device radio firmware can be updated over-the-air by supported wireless
gateways. WirelessHART radio firmware can not be updated.
Update Radio Firmware Using Honeywell Gateway
With one exception, the process to upgrade a Ranger Pro device radio firmware on a Honeywell
gateway is the same as upgrading the sensor firmware. In the tools ribbon, choose Radio.
Otherwise the steps are entirely the same. For details, see Maintenance on page43.
Update Radio Firmware Using Yokogawa Gateway
With one exception, the process to upgrade a Ranger Pro device radio firmware on a Yokogawa
gateway is the same as upgrading the sensor firmware. In the Firmware Download Manager
dialog box, select the Radio Firmware tab. Otherwise the steps are entirely the same. For details,
see Update Sensor Firmware Using Bently Nevada Ranger Pro ISA100 Gateway on page51.
Update Radio Firmware Using the Bently Nevada Ranger Pro
ISA100 Gateway
To update the radio firmware using the Bently Nevada Ranger Pro ISA100 gateway web interface:
1. Verify that all Ranger Pro devices are provisioned, connected to the network, and joined to
the gateway.
2. In the gateway web interface, select the Firmware menu item.
3. Upload the required firmware by clicking on the Upload button on the Firmware tab:
a. Click on Browse to navigate to and select the relevant radio firmware file.
b. Select the Firmware Type to be uploaded as Radio.
c. Enter the firmware Version number and provide a short Description. Click OK to
upload the firmware.
4. Select the Devices to Upgrade tab and select Radio as the firmware type to update.
5. Select the devices to which the firmware update must be applied and select Execute.
6. Monitor the update on the Progress tab.
56/57
Ranger Pro Wireless Condition Monitoring Device
User Guide 125M6113 Rev. F