Use Instructions

231 rue Pierre et Marie Curie, 31670 LABEGE, FRANCE
[e-mail] – [phone]
©2020 BeOn IoT SAS. All rights reserved.
beon-iot.com
Powering BeOn A1
Top view
1. Remove the bottom part of the casing by unscrewing the 2 screws using a PH2 screwdriver.
Bottom view
2. Place 4 Energizer L92 cells with minus (-) side of the cell placed on the spring side.
Interior view
3. Put the bottom part of the casing and screw it to the product.