Operation Manual
Any equipment you connect to the connection panel must be registered in the
SOURCE LIST SETUP menu.
Connection panel – BeoPlayV1–40
USB ( , 5V – 0.5A)
For connection of a USB
device to browse digital
photos, video or music les
Ethernet (
)*
1
For connection to the Internet. For
software updates or for UPnP streaming of
digital photos, video or music les from,
for example, a NAS device
SATELLITE (14/18V – 0.4A)
Not in use
AERIAL (5V – 50mA)
Not in use
2 x COMMON INTERFACE
(CAModule)
Not in use
Important
Mains cord and plug Connect the ~socket on the connection panel of your TV to the wall outlet.
The TV is in standby mode and ready to be used.
The supplied plug and mains cord are specially designed for the product. Do
not change the plug and if the mains cord is damaged, you must buy a new
one from your Bang& Olufsen retailer.
1
*Make sure the cable connection between the
product and the router does not exit the building
to avoid contact with high voltage.
AERIAL COMMON INTERFACE
SATELLITE
CHIPSIDE
CHIPSIDE
5V 50mA
10