Operation Manual

How do I…
…select another Beo4 button to activate a source?
> Press MENU and bring up the SETUP menu.
> Bring up the SOURCE LIST menu.
> Select the source you want to congure, for
example MEDIA BROWSER, and press the
centre button.
> Step to the BUTTON menu and use the
navigation button right to bring up the list of
buttons.
> Use the navigation button up and down to step
between the buttons and press the centre
button to select the button you want to use.
…add a new ‘button’ to my Beo4 list?
> Press and hold the standby button down.
> Press LIST to get access to the Beo4 setup
function.
> Let go of both buttons. ADD? appears in the
display.
> Press the centre button and use the navigation
button up to select, for example, AV?
> Press the centre button to bring up the list of
extra ‘buttons’ to add from. The rst ‘button’
appears in the display, it ashes on and off.
> Press the navigation button up and down to
move forwards or backwards in the list of extra
‘buttons’.
> Press the centre button to add and place the
‘button’ on its preset position in the list, or …
> … press 1 – 9 to insert the ‘button’ at a specic
position in the list.
> ADDED appears, indicating that the ‘button’ has
been added. Long press on BACK will leave the
setup.
To activate some functions on your Beo4 remote
control, you must rst add the ‘button’ to the
Beo4 list of functions.
If you want another Beo4 button to activate a
source, you can change this in the SOURCE LIST
SETUP menu.
…set my Beo4 in MODE1?
> Press and hold the standby button down.
> Press LIST to get access to the Beo4 setup
function.
> Let go of both buttons. ADD? appears in the
display.
> Press LIST or navigation button up to display
MODE? on Beo4.
> Press the centre button to select the setup you
want.
> Press the navigation button up and down to
display MODE1 on Beo4.
> Press the centre button to store the
conguration.
> STORED appears, indicating that the
conguration has been stored. Long press on
BACK will leave the setup.
A Beo4 remote control with navigation button
must be set to MODE1.
For more information on your Beo4 remote control, see the Beo4 guide.
19