Operation Manual

ManualsBrandsBeoplay ManualsRemote ControlBeoplay V1

How to set up your television

Important

– guides and FAQs are found on www.beoplay.com/v1/support

To ensure proper ventilation, allow enough space around the screen. Do not cover the ventilation grill. At over heating

(ashing

standby indicator and an on-screen warning), switch the TV to standby, not off, in order for the TV to cool down. You

cannot operate the TV during this time.

Connect your television to the Internet to receive software updates and download Peripheral Unit Controller (PUC) tables.

It is recommended that you set the television to update software automatically.

For more information on wired or wireless setups, see the online guide and the guide enclosed with the wireless network

antenna.

Ventilation

Ethernet connection

Network settings

Guides and more information, for example, FAQs (Frequently Asked Questions) are

found on www.beoplay.com/v1.

Unpack the television and place it on a soft

blanket. Remove the four pins from the television.

Before mounting the stand or wall bracket,

remember to insert the speaker cover. Hold the

speaker cover with both hands and slide it

carefully into the hole on the side of the television.

Then mount the stand or wall bracket

(see separate guide).

1.Unpack the television

2.Insert speaker cover and mount

stand/wall bracket

To remove the speaker cover, gently push it out

using one of the four pins removed from the

television. If the television is mounted on the table

stand or wall bracket, you must rst remove the

sides on the stand or wall bracket to remove the

speaker cover. See the guides enclosed with the

stand or wall bracket.

– To remove the connection cover, pull out at the

bottom rst to release the cover, then pull it off.

– Connect the mains cord and Ethernet cable. For

a wireless connection, connect the wireless

network antenna.

– Switch on the television (press TV). If prompted

for a pin code, enter the pin code provided by

your retailer and continue with rst-time setup

(see next page).

3.Connect your TV

WLAN

ANTENNA

Mains supply

Wireless network

antenna

Ethernet