Operation Manual

Connection panel – BeoPlayV1–32
Important
Any equipment you connect to the connection panel must be registered in the
SOURCE LIST SETUP menu.
Mains cord and plug Connect the ~socket on the connection panel of your TV to the wall outlet.
The TV is in standby mode and ready to be used.
The supplied plug and mains cord are specially designed for the product.
Do not change the plug and if the mains cord is damaged, you must buy a
Bang& Olufsen approved mains cord.
1
*Make sure the cable connection between the
product and the router does not exit the building
to avoid contact with high voltage.
Ethernet (
)*
1
For connection to the Internet.
For software updates or for
UPnP streaming of digital photos,
video or music les from, for
example, a NAS device
SATELLITE (14/18V – 0.4A)
Not in use
2 x COMMON INTERFACE (CA Module)
Not in use
USB (
, 5V – 0.5A)
For connection of a
USB device to browse
digital photos, video or
music les
AERIAL (5V – 50mA)
Not in use
~ – Mains supply
Connection to the
mains supply
ANTENNA WLAN
For connection of wireless
network antenna
WLAN
ANTENNA
AERIAL COMMON INTERFACE
SATELLITE
CHIPSIDE
CHIPSIDE
5V 50mA
8