POWER ZONE
INDEX ENGLISH » Introduction........................................................................................................................................... 6 Safety instructions ............................................................................................................................... 6 Benefits and special features of your new power supply...................................................................... 7 Technical advantages............................................
FRANÇAIS » Introduction......................................................................................................................................... 23 Consignes de sécurité......................................................................................................................... 23 Caractéristiques de votre nouveau bloc d‘alimentation...................................................................... 24 Avantages techniques......................................................
ESPAÑOL » Introducción........................................................................................................................................ 40 Indicaciones des seguridad................................................................................................................. 40 Ventajas y particularidades de su nuevo bloque de alimentación........................................................41 Ventajas técnicas....................................................................
1. INTRODUCTION We are delighted that you have chosen to use a be quiet! power supply from out PowerZone series in your PC. In order to be able to answer your initial questions in advance, we have summarized the advantages and features of the PowerZone power supply series in this comprehensive manual. PowerZone is a completely new be quiet! power supply series and especially designed for Gamers.
If you want to clean your power supply, disconnect it completely from the mains and never use a damp cloth or cleaning agent. Clean the power supply from the outside using a dry cloth. Before using the power supply, allow it to warm up to room temperature for one hour to prevent condensation accumulating in the power supply. 3. BENEFITS AND SPECIAL FEATURES OF YOUR NEW POWER SUPPLY High efficiency: The power supplies of the Powe Zone series hare highly efficient with 88%.
The fan control system generates a start-up signal. This short, high-voltage burst ensures that all the connected fans in the case will start together each time. Important: Connect only one fan per cable. COOL*OFF Function: The so called COOL*OFF Function stands for a fan follow-up control. Usually, fans stop running after the PC has been turned off, even though there is still a lot of heat inside the case. This problem is solved by be quiet! with the COOL*OFF Function.
Serial ATA (SATA) connectors: Our PowerZone Series power supplies have numerous S-ATA connectors. 5. COMPATIBILITY The be quiet! PowerZone series power supplies are compatible with all recent popular power supply and motherboard specifications such as: ∙∙ Intel ATX12V Power Supply Design Guide Version 2.4 (and downwardly compatible to V2.31, V2.3, V2.2, V2.01, V2.0 ) ∙∙ ATX System Design Guide Version 2.2 and Version 2.1 ∙∙ BTX Version 1.
7. SAFETY FUNCTIONS All be quiet! power supplies have numerous safety functions. They are designed to protect the power supply and the components connected to it against damage. If one of these safeguards is triggered, the system will reboot or power off in most cases. If this happens, you should immediately check the PC for errors. For more info on troubleshooting see the “Troubleshooting” chapter.
If the system in which you installed the power supply does not work properly, check for these possible sources of error first: ∙∙ Check that the mains cable to the power supply is correctly and firmly plugged into the power supply and the socket. Ideally, you should use a separate power socket for the computer power supply. ∙∙ Check whether all connectors are correctly plugged in, and make any necessary adjustments, such as un case of incorrect polarity.
Please help to protect the environment and make sure, once you have decided to stop using the device, that you dispose of it responsibly via the correct collection system. In Germany, you are legally** required to dispose of used devices separately, instead of as domestic waste. Your local waste disposal authority has set up one or more collection points at which used devices from private households in your area can be handed in free of charge.
. MANUFACTURER’S DETAILS Listan GmbH & Co. KG Biedenkamp 3a, 21509 Glinde Germany For support in Germany, you can call our free service hotline, Monday through Friday 09:00 – 17:30 hrs. Tel. 040 736 7686 - 44 Fax 040-7367686-69 Email: service@bequiet.com Internet page and PSU Calculator: www.bequiet.com 14. COPYRIGHT ∙∙ You are not allowed to reproduce, disclose, publish or store the contents of this documentation, or excerpts of it, without the prior written consent of Listan.
1. EINLEITUNG Wir freuen uns, dass Sie sich dazu entschieden haben, ein be quiet!-Netzteil der POWERZONE Serie in Ihrem Rechner einzusetzen. Um Ihnen eventuelle erste Fragen im Vorwege zu beantworten, haben wir die Vorteile und Besonderheiten der POWERZONE Netzteilserie in diesem umfassenden Handbuch zusammengefasst. PowerZone ist eine komplett neue Serie von be quiet!, die speziell auf die Bedürfnisse von Gamern eingeht.
Sorgen Sie für eine ausreichende Belüftung Ihres Computergehäuses durch zusätzliche Lüfter, da bei heutigen komplexen und leistungsfähigen Systemen ein ATX kompatibles Netzteil allein nicht mehr für den Abtransport der im PC-Gehäuse produzierten Wärme ausreicht. Für den Fall, dass Sie Ihr Netzteil reinigen möchten, trennen Sie das Netzteil komplett vom Stromnetz und benutzen Sie keine feuchten Tücher oder Reinigungsmittel. Reinigen Sie das Netzteil nur von außen mit Hilfe eines trockenen Tuches.
Thermogeregelte Lüftersteuerung: be quiet!-Netzteile der PowerZone Serie verwenden eine präzise thermogeregelte Lüftersteuerung. Diese Kontrollautomatik steuert die Lüfter an den „FAN“-Anschlüssen des Netzteils. Die Geschwindigkeit der Lüfter wird in Abhängigkeit von der Wärmeentwicklung im PC-Gehäuse und Netzteil geregelt. Steigt die Temperatur an, fangen die Lüfter automatisch an schneller zu drehen, um eine rasche und effektive Kühlung im Gehäuse zu gewährleisten.
4. TECHNISCHE VORTEILE ATX 12V Version 2.4 + EPS 12V 2.92: be quiet! bietet mit der PowerZone Serie ein Netzteil an, welches zu den neuesten ATX12V und EPS 12V Spezifikationen kompatibel ist. PCI Express Stecker: Die Netzteile der PowerZone Serie verfügen über bis zu sechs PCIe Stecker (6+2-Pin), welche für den Einsatz von PCI-Express Grafikkarten notwendig sind. Bitte nutzen Sie vornehmlich immer die gleiche Steckernummerierung an derselben Grafikkarte (VGA1 an Grafikkarte 1 und VGA2 an Grafikkarte 2).
Bauen Sie Ihr altes Netzteil zunächst aus. Verfahren Sie hierfür wie folgt: ∙∙ Trennen Sie Ihren PC von allen vorhandenen Stromquellen und ziehen Sie alle am PC angeschlossenen Kabel vorsichtig ab. ∙∙ Öffnen Sie das PC-Gehäuse und achten Sie dabei auf die Anleitung des Herstellers. ∙∙ Trennen Sie alle Stecker vom Mainboard sowie allen weiteren Komponenten wie FDD, HDD oder optischen Laufwerken. Achten Sie bitte darauf, dass kein Stecker des alten Netzteiles mit einer Komponente verbunden ist.
OVP (Überspannungsschutz) Die Überspannungssicherung löst bei zu hoher Spannung auf den Leitungen aus und schaltet das Netzteil ab. SCP (Kurzschlusssicherung) Die Sicherung bei Kurzschluss im Sekundärteil des Netzteils verhindert einen Defekt am Netzteil und an den am Netzteil angeschlossenen Komponenten. OTP (Temperatursicherung) Bei einer zu hohen Wärmeentwicklung im Netzteil schaltet sich das Netzteil sofort automatisch ab. Sie können es dann erst nach dem Abkühlen wieder einschalten.
9. HÄUFIGE PROBLEME Problem: Die ausgelesenen Spannungen (über BIOS oder UEFI) sind zu niedrig/hoch Wenn Sie im BIOS oder UEFI des Mainboard oder im Betriebssystem die Spannungen des Netzteils überprüfen, kann es vorkommen, dass diese falsch dargestellt werden. Dies liegt meist an der ungenauen Messung des Mainboards und muss nicht zwangsweise der Realität entsprechen.
12. GARANTIE ∙∙ Fünf Jahre Herstellergarantie für Endkonsumenten (nur Ersterwerb vom autorisierten be quiet!Händler) ∙∙ Vorortaustausch in den ersten 12 Monaten ab Kaufdatum vom autorisierten be quiet!-Händler ∙∙ Eine Garantieabwicklung und der Vorortaustausch ist nur in Verbindung mit Angabe der Seriennummer und Modellbezeichnung, sowie einer beigefügten Kopie des Kaufbeleges eines autorisierten be quiet!-Händlers möglich. Vorortaustausch nur innerhalb Deutschlands und Frankreichs.
13. HERSTELLERANGABEN Listan GmbH & Co. KG | Biedenkamp 3a | 21509 Glinde Deutschland Für weitere Unterstützung erreichen Sie uns innerhalb Deutschlands unter der unten stehenden kostenlosen Service-Hotline, montags bis freitags von 09:00 bis 17:30 Uhr. Kostenlose Hotline: 0800 – 0736736 Fax: 040-7367686-69 E-Mail: info@bequiet.com Internet und PSU-Calculator: www.bequiet.com 14.
1. INTRODUCTION Nous sommes heureux que vous ayez choisi d’installer un bloc d’alimentation PowerZone de be quiet! dans votre PC. Nous avons réuni dans ce manuel, que nous avons voulu le plus complet possible, l’ensemble des caractéristiques et spécificités de la gamme PowerZone, afin de répondre par avance à vos premières interrogations.
Si vous souhaitez nettoyer votre bloc d’alimentation, veuillez le débrancher. Il est fortement déconseillé d’utiliser un chiffon humide ou des produits de nettoyage. Nettoyez uniquement l’extérieur du bloc d’alimentation à l’aide d’un chiffon sec. Nous vous rappelons que l’ouverture de votre bloc d’alimentation annule la garantie. Avant la première utilisation de votre bloc d’alimentation, il est recommandé de le laisser à température ambiante une heure avant de le mettre en marche.
un refroidissement rapide et efficace à l’intérieur du boîtier. L’ajustement immédiat de la ventilation en fonction de la température permet de préserver vos composants ainsi que votre alimentation. Avant de connecter vos ventilateurs directement à l’alimentation, veuillez vous assurer qu’ils ne sont pas équipés de capteurs thermiques ou de potentiomètres. Le système de régulation des ventilateurs génère une impulsion au démarrage.
Connecteurs PCIe : Les blocs d’alimentation de la gamme PowerZone comptent jusqu’à 6 connecteurs PCIe (6+2 pin), comme le nécessitent les cartes graphiques PCI Express. Veuillez, autant que possible, suivre les recommandations pour brancher vos câbles PCIe, en connectant la bonne carte graphique sur la bonne fiche (PCIe 1 sur VGA 1, PCIe 2 sur VGA 2). Veuillez consulter les informations de la page 58.
• Retirez les vis se trouvant à l‘arrière de l‘alimentation et sortez-la avec précaution du boîtier PC. Pour ce faire, veillez à ce qu‘aucun câble ne se prenne dans les composants et ne les endommage. Montage de votre nouveau bloc d‘alimentation PowerZone : ∙∙ Placez le nouveau bloc d‘alimentation à l‘emplacement prévu dans le boîtier et fixez-le sur la face arrière, à l‘aide des quatre vis fournies. Veillez à n’exercer aucune pression excessive.
OTP (protection contre la surchauffe) Si l‘intérieur de l‘alimentation atteint une température trop élevée, elle s‘éteint automatiquement. La remise sous tension n‘est possible qu‘une fois le bloc d‘alimentation refroidi. Veillez à ce que le refroidissement du PC soit suffisant. OPP (protection contre les surcharges) Cette sécurité se déclenche dès que la puissance totale fournie par le bloc d‘alimentation est plus élevée que la charge maximale spécifiée.
le système d‘exploitation, il est possible que les valeurs affichées soient inexactes. Ceci provient en général de l‘imprécision de mesure de la carte mère et ne reflète pas forcément la réalité. Problème : après le montage d‘une nouvelle carte graphique, l‘ordinateur ne démarre plus ou plante inopinément Suite à l’installation d’une nouvelle carte graphique plus performante sur votre système, votre ordinateur ne démarre plus ou plante très régulièrement.
Nous vous rappelons que le service d’échange sur site n‘est disponible qu‘en Allemagne et en France métropolitaine. L‘échange ne peut avoir lieu que dans le pays d‘achat de l‘appareil. Les produits retournés sous garantie sont contrôlés à leur réception par notre service après-vente. Si un bloc d‘alimentation s‘avère exempt de tout défaut, il est renvoyé au client. En outre, nous nous réservons le droit de facturer un montant forfaitaire pour couvrir les frais de vérification engagés.
14. DROITS D‘AUTEUR ∙∙ Le contenu de la présente documentation ne peut être reproduit, distribué, diffusé ou enregistré d‘aucune manière que ce soit, ni en tout ni en partie, sans l‘autorisation préalable écrite de Listan GmbH & Co. KG. ∙∙ be quiet! est une marque déposée de la société Listan GmbH & Co. KG. Les autres noms de produits et de sociétés mentionnés dans la présente documentation peuvent être des marques ou des noms commerciaux appartenant à leurs propriétaires respectifs.
1. WPROWADZENIE Cieszymy się, że zdecydowali się Państwo na zamontowanie w swoim komputerze zasilacza be quiet! serii PowerZone. Aby od razu odpowiedzieć na Państwa ewentualne pierwsze pytania, opisaliśmy zalety i cechy szczególne serii zasilaczy PowerZone w niniejszym szczegółowym podręczniku użytkownika. PowerZone jest całkowicie nową serią zasilaczy be quiet! zaprojektowaną specjalnie dla graczy. Bazą dla powstania tej serii były doświadczenia w rozwoju pozostałych serii zasilaczy.
Otworzenie urządzenia prowadzi do utraty gwarancji. Przed uruchomieniem zasilacz powinien leżeć godzinę w temperaturze pokojowej, aby zapobiec utworzeniu się w nim skroplin. 3. ZALETY ORAZ CECHY SZCZEGÓLNE NOWEGO ZASILACZA Wysoka efektywność (sprawność): Zasilacze serii PowerZone wykazują bardzo Przyczynia się to do ograniczenia strat mocy. Efficiency (%) Efficiency of the Power Supply » wysoką sprawnością sięgającą do 88%.
Funkcja COOL*OFF: Funkcja COOL*OFF odpowiada za dalszą pracę wentylatorów. Zazwyczaj, wentylatory przestają pracować w momencie wyłączenia komputera, mimo, że w obudowie jest wciąż dużo ciepła. Problem ten został rozwiązany przez be quiet! dzięki funkcji COOL*OFF. Dzięki niej wentylatory pracują przez 3 minuty po zamknięciu systemu, tak by chronić cenne komponenty w czasie maksymalnego obciążenia cieplnego.
Wtyczki Serial ATA (S-ATA): Zasilacze serii PowerZone są wyposażone w dużą liczbę wtyczek S-ATA. 5. KOMPATYBILNOŚĆ Zasilacze be quiet! serii PowerZone są kompatybilne ze wszystkimi aktualnie stosowanymi specyfikacjami zasilaczy oraz płyt głównych, jak m.in. ∙∙ Intel ATX12V Power Supply Design Guide wersja 2.4 (oraz kompatybilne wstecznie z V2.31, V2.3, V2.2, V2.01, V2.0). ∙∙ ATX System Design Guide wersja 2.2 i wersja 2.1 ∙∙ BTX wersja 1.
Zastosowanie regulacji temperaturowej wentylacji zasilacza: Dany wentylator obudowy podłączać zawsze tylko do jednego, oznaczonego symbolem FAN, gniazda w zasilaczu. Zwrócić uwagę na to, że wentylatory obudowy dysponują zakresem pracy pomiędzy 4V i 12V. Uwaga: Tylko jeden wentylator do każdego kabla instalacyjnego! Maksymalne obciążenie wszystkich przyłączy wynosi łącznie 0,8A/9,6W! 7. FUNKCJE BEZPIECZEŃSTWA Wszystkie zasilacze be quiet! wyposażone są w liczne funkcje bezpieczeństwa.
Uwaga: Praca przy źródłach prądu może prowadzić do urazów zagrażających życiu. W razie wystąpienia smug dymu, uszkodzenia kabli oraz kontaktu z substancjami ciekłymi należy natychmiast wyłączyć zasilacz z sieci i nie uruchamiać go ponownie. Nigdy nie należy rozkręcać zasilacza. Wewnątrz zasilacza znajdują się elementy, które mogą wykazywać wysokie napięcia również po długiej przerwie w użytkowaniu. Naprawy mogą być wykonywane tylko przez autoryzowany personel specjalistyczny.
10. AKCESORIA W skład zestawu zasilacza wchodzą następujące akcesoria: ∙∙ zestaw modularnych kabli ∙∙ kabel zasilający ∙∙ instrukcja obsługi ∙∙ opaski do przewodów ∙∙ śruby do zamocowania zasilacza 11. WSKAZÓWKI DOTYCZĄCE RECYCLINGU Zgodnie z europejskimi przepisami* niedozwolone jest wyrzucanie używanych urządzeń elektrycznych oraz elektronicznych do zwykłych pojemników na śmieci. Muszą one zostać zebrane oddzielnie.
Ponadto zastrzegamy sobie prawo do naliczenia ryczałtowej opłaty kontrolnej za powstałe koszty. ∙∙ Otwarcie urządzenia, jakiekolwiek manipulacje, modyfikacje techniczne i szkody wynikające z zewnętrznej siły mechanicznej powodują utratę gwarancji. ∙∙ Szczegółowe warunki gwarancji, dostępne są w zakładce Serwis/Warunki gwarancji na stronie głównej www.bequiet.com. 13. DANE PRODUCENTA Listan GmbH & Co del KG. Biedenkamp 3a 21509 Glinde Niemcy tel. 0800 – 0736736 faks 040-7367686-69 e-mail: info@bequiet.
1. INTRODUCCIÓN Gracias por haber escogido un bloque de alimentación be quiet! de la serie PowerZone para su ordenador. Para poder contestar a todas las primeras preguntas posibles, hemos resumido las ventajas y particularidades de la serie de bloques de alimentación PowerZone en este completo manual. Si tiene más dudas, consulte a nuestro servicio de atención al cliente. Para ello, vea los datos de contacto del punto Datos del fabricante.
Ponga el bloque de alimentación en funcionamiento cuando lleve una hora en un entorno ventilado; de lo contrario, se podría condensar humedad en el bloque de alimentación. 3. VENTAJAS Y PARTICULARIDADES DE SU NUEVO BLOQUE DE ALIMENTACIÓN Gran eficacia (grado de eficacia): Los bloques de alimentación de la serie PowerZone presentan una muy elevada eficacia de hasta el 88%. De este modo, las pérdidas de potencia son menores.
Al conectar ventiladores externos al bloque de alimentación, asegúrese de que estos no tengan un sistema termosensorial o potenciómetro propio. El control de ventilación dispone de un impulso de arranque. De este modo, se garantiza que todos los ventiladores de la caja conectados arranquen siempre, ya que un breve impulso con tensión más alta arranca los ventiladores. Importante: Conecte únicamente un ventilador por cable.
Sobre todo, utilice siempre la misma numeración para conectores y tarjetas gráficas (PCIe 1 a VGA 1 y PCIe 2 a VGA 2). Tenga en cuenta la importante información en la página 58. Conector de placa base de 20/24 pines: Con el conector principal ampliable de 20 a 24 pines, la serie PowerZone también es compatible con todas las especificaciones inferiores convencionales de placa base.
Montaje del nuevo bloque de alimentación be quiet! PowerZone: ∙∙ Coloque ahora el nuevo bloque de alimentación en el lugar previsto en la caja del PC, y atorníllelo a la parte trasera con los cuatro tornillos suministrados. No aplique demasiada fuerza para ello. ∙∙ Inserte el conector de 20/24 pines en la toma prevista para ello de la placa base. Si dispone de una conexión de 24 pines, coloque los 4 pines adicionales en la posición correcta antes de insertar el conector en la toma de la placa base.
OPP (protección contra sobrecarga) Este fusible se activa en cuanto toda la potencia absorbida por el bloque de alimentación supera la carga máxima especificada. Este caso puede darse si el bloque de alimentación no dispone de suficiente potencia para el sistema (es decir, está subdimensionado). 8. SOLUCIÓN DE ERRORES A tener en cuenta: En los sistemas ATX, la placa base activa el bloque de alimentación para iniciar el PC.
Nota importante: Si el bloque de alimentación no funciona, asegúrese de haber leído todo el manual de instrucciones y de haber descartado los problemas mencionados. Si los problemas persisten, póngase en contacto inmediatamente con nuestro servicio de atención al cliente. 10.
La sustitución sólo puede darse en el país donde se ha adquirido el bloque de alimentación. Nuestro servicio técnico comprobará todos los reenvíos. Cuando se determine que un bloque de alimentación no presenta ningún error, se reenviará al cliente. Asimismo, nos reservamos el derecho de aplicar una tarifa por los costes derivados de analizar el dispositivo.
especiales, ocasionales, directos o indirectos, independientemente de cómo se produzcan. ∙∙ El contenido del presente documento se muestra tal como consta actualmente. Listan no asume ninguna garantía expresa ni tácita de la corrección o totalidad del contenido del presente documento, inclusive, pero no limitado a la garantía tácita de la aptitud comercial y la idoneidad para un fin determinado, a no ser que una ley aplicable o jurisprudencia prescriban una responsabilidad.
LIMITED WARRANTY Per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period. I. APPLICABILITY This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! products and is enforceable by only the original consumer purchaser. Proof of purchase is required for warranty service, so should be retained.
VI. LOCAL LAW AND YOUR WARRANTY This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary. VII. NO OTHER WARRANTY No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or addition to this warranty. VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE Please see your product owner’s manual or visit the Online Support section at www.bequiet.com for details and contact information.
TECHNICAL DATA Technische Daten, Données technique, Datos técnico, Dati tecnici, Dane techniczne 1. LABEL AC Input DC Output Max. Current Power Zone 1000W Max. Combined Power 100 - 240Vac Power Zone 5V 12V -12V 5VSB 25A 25A 83A 0.3A 3A 996W 3.6W 15W 170W 1000W 100 - 240Vac 850W Max. Current Max. Combined Power Power Zone 750W Max. Combined Power 12V -12V 5VSB 25A 25A 70A 0.3A 3A 840W 3.6W 15W 160W 850W Power Zone 650W Max. Current Max.
2. VOLTAGE REGULATION DC Output 3.3V 5V 12V -12V 5VSB Tolerance +/- 3% +/- 3% +/- 2% +/- 5% +/- 3% Ripple/Noise (max.) 50mV 50mV 120mV 120mV 50mV 3. OPERATING CONDITIONS Environment Temperature Rel. Humidity Operation 0 ~ 50°C up to 85% (non-condensing) Storage -40 ~ 70°C up to 95% (non-condensing) 4. MINIMAL LOAD 3.3V 5V 12V -12V 5VSB 1000W 0.1 0.2 0.1 0A 0A 850W 0.1 0.2 0.1 0A 0A 750W 0.1 0.2 0.1 0A 0A 650W 0.1 0.2 0.1 0A 0A 5.
6.
850W 600mm 50 100mm mm 4-pin 24-pin 20-pin Fan connectors 12V P4-connector 12V P8-connector 12V P4-connector 12V P8-connector PCIe 1 (6+2-pin) PCIe 2 (6+2-pin) PCIe 3 (6+2-pin) PCIe 4 (6+2-pin) 550mm 54 S-ATA S-ATA HDD S-ATA S-ATA SATA HDD HDD HDD S-ATA S-ATA 150mm 150mm HDD SATA HDD SATA 150mm 150mm FDD
750W 600mm 50 100mm mm 4-pin 24-pin 20-pin Fan connectors 12V P4-connector 12V P8-connector 12V P4-connector PCIe 1 (6+2-pin) PCIe 2 (6+2-pin) PCIe 3 (6+2-pin) PCIe 4 (6+2-pin) 550mm S-ATA S-ATA HDD S-ATA S-ATA SATA S-ATA S-ATA HDD 150mm 150mm 150mm HDD FDD SATA HDD 150mm 55
650W 600mm 50 100mm mm 4-pin 24-pin 20-pin Fan connectors 12V P4-connector 12V P8-connector 12V P4-connector PCIe 1 (6+2-pin) PCIe 2 (6+2-pin) PCIe 3 (6+2-pin) PCIe 4 (6+2-pin) 550mm 56 S-ATA S-ATA HDD S-ATA S-ATA SATA S-ATA S-ATA HDD 150mm 150mm 150mm HDD SATA HDD 150mm FDD
7. DISTRIBUTION AND PIN ASSIGNMENT 24 PIN ATX power connector Pin Color Signal Pin Color Signal 1 Orange +3.3VDC 13 Orange Brown +3.3VDC +3.3Vdef.sense 2 Orange +3.3VDC 14 Blue -12VDC 3 Black COM 15 Black COM 4 Red +5VDC 16 Green PS_ON/OFF 5 Black COM 17 Black COM 6 Red +5VDC 18 Black COM 7 Black COM 19 Black COM 8 Grey PWR_OK 20 9 Violet +5VSB 21 Red +5VDC 10 Yellow +12VDC 22 Red +5VDC 11 Yellow +12VDC 23 Red +5VDC 12 Orange +3.
PCI express VGA connector Pin Color Signal Pin Color Signal 1 Yellow +12VDC 4 Black COM 2 Yellow +12VDC 5 Black COM 3 Yellow +12VDC 6 Black COM 7 Black COM 8 Black COM +12V power connector Pin Color Signal Pin Color Signal 1 Black COM 3 Yellow +12VDC 2 Black COM 4 Yellow +12VDC Pin Color Signal 1 Black COM 2 White up to +12VDC *For P4 motherboard Fan connector *For Fans only 58 1 4 2 5 3 6 7 8