User Manual

Basic Operation
1.Charge the Player
Plug the attached USB cable into the USB port of a computer or USB charging
adapter to charge this player. When you start charging in computer, it will show
two options: “Charge & Transfer” and “Charge & Play”. It will show the
charging state on the top right.
2.Power On/Off
Hold the Power Button for 3 seconds to turn on/off the player.
Note: This machine has automatic sleep, automatic shutdown and power
saving function. it will turn to screen saver and blank screen automatically if
this player is not operated for a long time. All function buttons will work only
when the screen is bright. If the machine is under screen saver state, press the
Power On button to light up the screen and then do corresponding operation.
3.Music Download (Data Transfer)
Plug it into your computer with attached USB cable and transfer media files
(songs, videos, images, etc.). It can be used as a flash driver and store any
file.
Open ‘my computer’ and you will see a USB disk named ‘mp3-player’. You can
copy media files directly to this player, or create folders in player disk to
organize your media files. When you disconnect this player normally, you will
find your media files in the related functions of the player.
Note: if your computer cannot identify your MP3 Player, try to update your USB
driver or use another micro-USB cable.
4.Lock Screen
Touch the power button to close the screen, it does not affect the song playing.
5.Return to main page
While on playing interface, touch the Back button to go back.
6.Volume Adjustment
Touch Volume + / - to adjust sound volume on the Music Play Interface.
Note: Volume Adjustment is not available at screen-off status.
7.Built in speaker
There’s a built-in speaker in this MP3 Player, the speaker will turn on
automatically when no earphones are connected. You can close this function
in ‘Application’ - ‘Set’ - ‘Speaker switch’ - ‘OFF’.
8.Main Page