Instruction Manual

SETTINGS
WARNING: Always be certain that the firearm is unloaded and
the empty chamber indicator installed.
Please refer to the instructions given in the ”Load Check”
portion of this manual. (See page 17.)
SETTING THE REAR SIGHT
The aiming device consists of a five position rear sight and a
front sight adjustable both in elevation and for windage. Both
the rear sight and the front sight are flip-up type.
The five positions are corresponding to the following distances
and diopter diameters:
• Position “1” firing distance 10 meters diameter of diopter 2.8
millimeters.
• Position “2” firing distance 10 meters diameter of diopter 3.5
millimeters.
• Position “3” firing distance 25 meters diameter of diopter 2.8
millimeters.
• Position “4” firing distance 25 meters diameter of diopter 3.5
millimeters.
• Position “6” firing distance 50 meters diameter of diopter 2.8
millimeters.
SETTING THE FRONT SIGHT POST
• The Front Sight can be adjusted for both windage and
elevation.
• The windage is adjusted by the windage screw on the right
side of the front sight post. Use the supplied tool or a
standard flat screwdriver to adjust the windage (Fig. 16).
• By turning the windage screw clockwise the point of impact
is adjusted to the left. Turning counter-clockwise the point of
impact is adjusted to the right.
29