Instruction Manual

33
• Make sure the firing pin assembly is in the correct position.
• Apply 2 drops of gun oil to the main spring.
• Apply 1 drop of gun oil to the extractor.
• Apply 1 drop of gun oil to each end of firing pin assembly.
• Reassemble the firearm and check for proper function.
• Verify the gun is ON SAFE.
• Insert an EMPTY magazine and retract the bolt handle so that
the bolt assembly remains in the open position.
• Insert the red tab (Chamber Unloaded Indicator).
• Remove the magazine.
• Pull the bolt handle rearward, then release it to close the bolt
assembly.