Instruction Manual

REVERSING THE MAGAZINE

RELEASE BUTTON

WARNING:Makesurethepistolisunloaded.Ifnot ,unloaditfollowing

the“UNLOADING”procedure(pages15-17).

CAUTION: Before proceeding with the disassembly of the

components, closely observe and memorize the location of the

componentstomakeassemblyeasier.

NOTICE: It is advisable to perform disassembly and assembly

operations over a table to catch components should they drop.

Remove the magazine.

Follow the instructions previously given to remove the magazine

releasebutton(pages34-36).

CAUTION: The spring is under tension.

Reassemble the magazine button with its spring on the opposite side

of the pistol.

Trytoremovethebuttonfromitsseattocheckthatitisassembled

properly.

Check that the magazinerelease button functions correctlywith an

empty magazine inserted into the grip.