Instruction Manual

50
RECOIL SPRING AND SPRING GUIDE ASSEMBLY
Lightly oil the spring guide assembly with gun oil. After extensive use
it may be necessary to first clean these parts using a NYLON cleaning
brush.
FRAME
Usinga clothlightlysoakedingunoil,cleantheareasofthecocking
lever, the ejector, and the slide rails. If necessary, use a cleaning brush.
dry the parts and lightly oil the slide rails.
MAGAZINE
Makesurethemagazineisthoroughlycleanandthatthefollowerslides
easily downward if pressed. Dry the internal walls of the magazine box
with a cloth. Do not leave any oil in the magazine.
CAUTION: Do not apply excess oil. Accumulation of oil attracts dirt
and dust, which can interfere with the functioning and reliability of the
firearm.
STORAGE
WARNING: Always store the pistol UNLOADED, with the magazine
empty.
WARNING: Always store your firearm so that children can not gain
accesstoit.Toreducetheriskofaccidentsinvolvingchildren,unload
yourfirearm,lockit and storetheammunitionin a separatelocked
location.
CAUTION:Beforestorage,alwayschecktheconditionsofthepistol
anditscase.Makesurethecaseisdryandthatthefirearmisdryand
oiled. Traces of moisture or drops of water could damage the pistol.