Quick Start Guide

ManualsBrandsBergamont ManualsBicycle E-bike2016

66 67

SHORT MANUAL | OWNER`S MANUAL 2016

OWNER`S MANUAL 2016 | SHORT MANUAL

ENGLISH

Component What to do Before every Monthly Annually Other

ride intervals

Painted/anodized/ Polish · every

carbon surfaces 6 months

at least

Wheels/spokes Check for trueness and tension ·

True or retighten o if necessary

Handlebars and Check and replace, if necessary o every

stem (aluminium 2 years at

and carbon) the latest

Headset Check for bearing play ·

Regrease o

Metal surfaces Polish (except: rim sides of · every

rim brakes, rotors) 6 months

at least

Hubs Check for bearing play ·

Regrease o

Pedals (all) Check for bearing play ·

Pedals (clipless) Clean and grease locking ·

mechanism

Seat post/stem Check bolts ·

Dismount and re-lubricate, o

carbon: new assembly

paste (no grease!)

Front/rear derailleur Clean and grease ·

Quick-releases/ Check seat ·

thru axles

Bolts and nuts Check and retighten, ·

(Multi-speed hubs, if necessary

mudguards etc.)

Valves Check seat ·

Cables gears/brakes Disassemble and regrease o

If you have a certain degree of mechanical skills, experience and suitable tools,

such as a torque wrench, you should be able to do the checks marked · by your-

self. If you come across any defects, take appropriate measures without delay.

If you are in doubt or if you have any questions, contact your BERGAMONT

dealer.

Jobs marked o are best left to your BERGAMONT dealer.

NOTE!

For your own safety, bring your BERGAMONT bike to your BERGAMONT

dealer for its first inspection after 100 to 300 kilometres, 5 to 15 hours of

initial use or four to six weeks, and at the very latest after three months.

RECOMMENDED TORQUE SETTINGS FOR YOUR BERGAMONT

BIKE

All bolted connections of the bike components have to be tightened care-

fully and checked regularly to ensure the safe and reliable operation of the

BERGAMONT bike. This is best done with a torque wrench that disengages

as soon as the desired torque value has been reached or a click-type torque

wrench. Tighten carefully by approaching the prescribed maximum torque

value in small steps (0.5 Nm increments) and check in between the proper fit

of the component. Never exceed the maximum torque value indicated by the

manufacturer!

Where no maximum torque setting is given start with 2 Nm. Observe the indi-

cated values and observe the values on the components and/or in the manuals

of the component manufacturers on the enclosed BERGAMONT info CD.

Component Bolted connections Shimano

SR AM/Avid

Tektro

TRP

(Nm) (Nm) (Nm) (Nm)

Rear derailleur Mount 8 - 10 8 - 10

(on frame/derailleur hanger)

Cable clamp 5 - 7 4 - 5

Pulley wheels 3 - 4

Front derailleur Mount on frame 5 - 7 5 - 7

Cable clamp 5 - 7 5

Shifter Mount on handlebars 5 2.5 - 4

Hole covering 0.3 - 0.5

Brake lever unit Mount on handlebars 6 - 8 5 - 7 6 - 8

Time trial brake lever 5 - 7

Hub Quick-release lever 5 - 7.5

Lock nut for bearing adjustment

of quick-release hubs 10 - 25

Sprocket cluster lock ring 29 - 49 40

Internal gear hub Hub axle nut 30 - 45

Crank Crank mount (grease-free square-head) 35 - 50

Crank mount (Shimano Octalink) 35 - 50

Crank mount

(Shimano Hollowtech II) 12 - 15

Crank mount (Isis) 31 - 34

Crank mount (Giga X Pipe) 48 - 54

Chainwheel mount 8 - 11 12 - 14 (steel)

8 - 9 (alu)

Sealed Shell (square-head) 49 - 69

cartridge Shell (Shimano Hollowtech II, 35 - 50

bearing SRAM Giga X Pipe) 34 - 41

Shimano Octalink 50 - 70

Pedal Pedal axle 35

Shoe Cleat 5 - 6

Spike 4

Brake Cable clamp 6 - 8 6 - 8 6 - 8 6 - 8

(V-brake) Brake shoe mount 6 - 8 6 - 8 6 - 8 6 - 8

Brake pad fixing 1 - 2

Brake boss frame/fork 8 - 10