Owner`s manual

17 | P a g e
Classic Stacking Cable Routing and Installation Guidelines
The Classic uses a 4 conductor phone cable to communicate with other Classic's or other MidNite products. This
cable is a standard 4 conductor phone cable and simply plugs into the jack on the Master Classic labeled slave.
Plug the other end into the master jack on the second device (Slave). There is a plastic clamp located on the
circuit board for routing the network cables above the USB jack so they stay tied down and out of the way.
Refer to figure 1.7A and 1.7B
Figure 1.7A Master / Slave hook up
Master Classic
Slave Classic