Owner`s manual

51 | P a g e
Programming
There are four separate ways to program a Classic Lite.
1-The programming is done using Dip Switches under the front cover of the MNLP.
2-The Classic Lite can be programmed with an independent MNGP.
3-The Lite can be Networked with a standard Classic and programmed using the standard Classic’s
MNGP
4-The Classic Lite can be programmed using the Local App (Through the Ethernet connection) software
included on the DVD or available at www.midnitesolar.com
Dip Switches
Below you will find an Explanation of the Dip switches and the values associated with their settings. Up
is on and down is off on the switches. To access the Dip switches you need to remove the front cover on
the Lite display panel. Firmly grasp the left and right side of the cover and slide it off.