BergHOFF Customer Service: 11063 State Road 54, Odessa, FL, 33556 1.727.375.7523 cs@berghoffusa.
Welcome to the World of BergHOFF BergHOFF is always ahead of the curve; a leading worldwide supplier of induction cooktops, tableware and kitchenware in both the private and commercial sectors. BergHOFF specializes in modern technology, defined quality, and remarkable performance. BergHOFF has grown to a highly sophisticated, successful international corporation.
1810027 - 2216743 2213735 1810003 - 2216750 2207123 1810119 - 2216736 -3-
8 3 4 5 9 21 7 1. Power “ON/OFF” button 2. Function button toggles between POWER / TEMP COOK / TIMER (where applicable) 3. Power Cook 1-10 (300W-1800W - 2207123) 4. Temp Cook 60ºC – 200ºC (150°F - 390°F) 5. Timer (150’) 6. Arrow up raises TEMP or POWER, increases TIME 7. Arrow down lowers TEMP or POWER, decreases TIME 8. Cooking surface (glass or ceramic) 9. Feet 6 8 7 All of our other models with designated buttons and on the PRO style models: 1. 2. 3. 4. 5. 6.
1. General information 1A. About this instruction manual -6- 1B. Symbols explained -6- 1C. Updates and translations -7- 1D. Copyright protection -7- 1E. Declaration of conformity -7- 2. Technical information 2A. Technical specifications -8- 2B. Control panel / keypad -8- 3. Packing, storage and transport 3A. Delivery check -9- 3B. Packing -9- 3C. Storage - 10 - 4. Preparing your induction cooktop for use 4A. Grounding - 10 - 4B. Electrical installation requirements - 10 - 5.
1. General information 1A. About this manual This manual contains information about the installation, operation, and maintenance of the BergHOFF appliance and should be considered an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure safe and correct use of this appliance.
1C. Updates and translations The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. The Dutch version of this instruction manual is definitive. All the information and instructions in this manual take into account standard safety regulations, current known levels of technical advancement as well as the experience we at BergHOFF have developed over many decades.
2. Technical information 2A. Technical specifications Name PRO Induction Cooking Induction Stove Induction Stove 1810003 - 2216750 2213735 - 1810027 Unit Item No.
7. Timer selection 8. Input control lamp 9. ON/OFF key/switch F 1800W-120V 3. Packaging, storage & transport 3A. Delivery check Please check the delivery upon completion and report transport damage immediately upon receipt. In case of visible damage, do not accept or accept the delivery with reservation, only marking the shipping documents with the indication of the extent of damage. Send the complaint to the freight company.
3C. Storage Keep the package closed until the device is installed in a dry ventilated place. Do not store it outdoors. Keep it dry and dust-free. Do not expose it to aggressive media. Do not expose it to direct sunlight. Avoid mechanical shocks and vibration. In case of longer storage, more than 3 months, make sure you regularly check the condition of the packaging and the device. 4.
Read all instructions carefully Remove unit from carton Remove all loose packing materials and accessories It is the responsibility of the installer to comply with all federal and local codes. Warranty of this unit is automatically voided upon any installation not matching the specifications discussed in this manual. BergHOFF recommends a dedicated electrical line be used for each unit installed. Do not share electrical circuits with any other electrical appliance and/or equipment.
area of application of the appliance must be followed and complied with. 5C. The appliance should never be left unattended during any operation. Keep away from children and other unqualified individuals. Safeguard this manual. When passing on/selling the appliance to a third party, the manuals must be handed over together with the appliance. Every individual using the appliance must operate in accordance with the manual and under consideration of the safety information. Indoor use only.
technology combines this fast reaction with the basic advantage of electricity, meaning being able to precisely adjust the heat supply. Additional advantages of an induction cooktop 6B. As the cooking surface is only heated indirectly by the use of the base of the cookware, boiled-over food cannot stick and burn. There is hardly any danger of burns for the user. The glass cooking top is only heated by the hot cookware.
6C. Do not lay the cable or use the unit on low-heat-resistant materials such as carpet, vinyl or on heat insulations. Do not cover the cable, keep it away from the operating range . The cooktop’s surface consists of temperature-resistant glass. If this should break, cleaning solutions and spillovers may penetrate the broken cooktop with a risk of electric shock. In case of damage, even only a small crack,immediately disconnect the device from the power supply and contact customer service.
For proper functioning, all cookware must have a plane magnetic base (a magnet must stick to it). We recommend cookware with a diameter between 12 (4 ¾“) and 26 cm (10 ¼“) for better results.
6E. Operating the cooktop General for all induction stoves: Plug the power cord into a suitable outlet. A beep signal sounds when the cooktop is in standby mode. Place induction suitable cookware in the center of the cooking surface. Now press the ON/OFF switch to turn the induction cooktop on. The control lamp “POWER” or " HEAT" blinks and an acoustic signal sounds and the unit will start to work at a default Power stage.
• “TEMP” The pre-set temperature stage is selected and the device turns on temperature stages between 60°C - 232°C (140°F - 450°F). With the arrow keys, you can change the settings at any time. The LED-display “TEMP (°C)” flashes up. (132°C - 270°F is the standard start temp when the unit is first turned on TEMP) • “TIMER” After selection of the operating mode (power stage or temperature stage), press the “Timer”key.
Specific for 18100027 - 2213735 - 2216743 Before turning on the power, make sure the cookware is on the ceramic plate with ingredients inside. To turn the power on, press the ON/OFF button once. The power light will turn a steady red and heating will begin. To select the proper heat setting, press the +/- keys until the correct heat setting is achieved.(defaults=5, heating steps 1-10).
Meaning this unit will operate at a maximum of 1800 watts (2000 watts on some models) on a standard 20 amp circuit. If you have one coil that is on and it is set to the maximum temperature (450°F or power level (10) and you turn the other coil on, the first coil’s power will be reduced by the equivalent amount of the second coil’s wattage. This is a normal operating feature. This appliance has plenty of capacity to accommodate two pans with ease.
agents that are used for cleaning the glass top. After the cleaning procedure, you should use a soft and dry cloth to wipe dry and polish the surface. 7B. Cleaning Clean after each use. Disconnect the powerplug and wait until the unit has cooled down. If the pots/pans that are used are not clean, staining or discoloration may occur. At first, you should clean the glass field with a damp cloth or a mild, non-abrasive soap solution.
! NOTE: For the disposal of the device, follow the local ordinances and regulations applied in your country or region. 9. Warranty Information Warranty of the BergHOFF Induction Cooktop is against defects in materials and workmanship for a period of one year from the date of sale. IMPORTANT!! Keep a copy of your sales receipt to verify date of purchase. You must provide proof of purchase, and date of purchase to obtain the warranty of the unit.
10. Error code list: – If LED-display shows the error code, please reference to the solution as following. Error code Cause and solution E0 The current is over 20A E1 Voltage is under 95V E2 Voltage is over 145V E3 The accessory and spare parts are damaged, please contact the nearest authorized service facility for trouble shooting, repair and adjustment.
11.
Induction cooktop Diagram 2 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Feet Base Motor Electrical Board Coil Thermostat Device Control Panel Frame Control panel contact Glass Plug - 24 -
Induction cooktop Diagram 3 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Black glass Frame Control Panel Thermostat Device Coil Plug Electrical Board Motor Base Feet - 25 -
Induction cooktop Diagram 4 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) Feet Base Support for Electrical Board Motor Nut for Control Panel Screw for Control Panel Control Panel Frame Control Panel Contact Glass Slot Thermostat Device Coil Electrical Board Plug - 26 -
Induction cooktop Diagram 5 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Ceramic plate Ceramic plate Upper housing Control PCB Sensor Coil Power cord Main PCB Fan Rubber foot Rubber foot Lower housing 13) 14) 15) 16) 17) 18) 19) 20) 21) - 27 - Fan Main PCB Filter PCB Coil Sensor Control PCB Control panel Control panel Crew
www.berghoffworldwide.
