MA N UA L BergHOFF Customer Service. 2323 Merchant Avenue Odessa, Florida 33556 1.727.375.7523 cs@berghoff-usa.
1810027 2213735 1810003 2207123
8 3 4 5 9 2 1 7 6 1. Power “ON/OFF” button 2. Function button toggles between POWER / TEMP COOK / TIMER (where applicable of course) 3. Power Cook 1-10 (300W-1800W - 2207123) 4. Temp Cook 60ºC – 200ºC (150°F - 450°F) 5. Timer (150’) 6. Arrow up raises TEMP or POWER, increase TIME 7. Arrow down lowers TEMP or POWER, decreases TIME 8. Cook surface (glass or ceramic) 9.
Welcome to the World of BergHOFF BergHOFF is always ahead of the curve, a leading worldwide supplier of the induction cooktop, tableware and kitchenware in both the private and commercial sectors. Specializing in modern technology, defined quality and remarkable performance.
1. General information 1A. About this instruction manual -6- 1B. Symbols explained -6- 1C. Updates and translations -7- 1D. Copyright protection -7- 1E. Declaration of conformity -7- 2. Technical information 2A. Technical specifications -8- 2B. Control panel / keypad -8- 3. Packing, storage and transport 3A. Delivery check -9- 3B. Packing -9- 3C. Storage -9- 4. Preparing your induction cooktop for use 4A. Grounding - 10 - 4B.
1. General information 1A. About this manual This manual contains information about the installation, operation and maintenance of the BergHOFF appliance and should be considered as an important source of information and as a reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure safe and correct use of this appliance.
1C. Updates and translations The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. The Belgian version of this instruction manual is definitive. All the information and instructions in this manual take into account standard safety regulations, current known levels of technical advancement as well as the experience we at BergHOFF have developed over many decades.
2. Technical information 2A. Technical specifications Name PRO Induction Cooking Unit Induction Stove Induction Stove Item No.
3. Packing, storage & transport 3A. Delivery check Please check the delivery upon completion and report transport damage immediately upon receipt. In case of visible damage, do not accept or accept the delivery with reservation, only marking the shipping documents with the indication of the extent of damage. Send the complaint to the freight company.
4. Preparing your induction cooktop for use Before the operation of your new induction cooktop begins, you must first do the following: 1. Remove all packing materials. 2. The cooktop must be placed on a dry, level, stable and non-flammable surface. 3. The cooktop must be kept away from other heat sources allowing 2 inches on all sides (front, rear and sides) for proper air circulation. If the air intake or exhaust outlet are blocked, the internal temperature will rise resulting in an error code. 4A.
5. Safety This segment provides a summary of important safety aspects. Every chapter provides specific safety tips to avoid danger which is highlighted by the abovementioned symbols. In addition, pay attention to all pictograms, markers and labels on the appliance, which must always be perfectly legible. Following all the important safety advice, you gain an optimal protection against all hazards as well as the assurance of a safe and trouble-free operation. 5A.
5C. Expected use Safe operation is only guaranteed when using the appliance for its intentional purpose. Any technical interventions, as well as assembly and maintenance are to be made by BergHOFF certified service representatives. The induction cooktop may not be used for: heating and warming inflammable, harmful, volatile or similar liquids or materials heating sealed tins; the tin can explode; in any case, remove the cover beforehand a.o..
Once you remove the cookware from the cooking surface, the appliance automatically switches to standby mode. The appliance detects whether suitable cookware is placed on the cooking surface. If the cookware is not suitable for induction stoves, no energy is transferred. 6B.
When you require a high intense heat, or you need a quick temperature increase, the Power cook mode should be used. Make sure that the electrical cord does not come in contact with any heat source or sharp edge. Do not let the cord hang over the table or counter edge. Some parts get hot during operation. Do not touch hot parts to avoid injuries! Do not use any accessory or spare parts that have not been recommended by the manufacturer.
Do not place any articles on the unit other than inductive cookware. Do not strike the unit causing damage. Do not put the unit into luggage. Throwing or dropping the unit can cause internal damage therefore voiding the warranty. If the unit becomes cracked, unplug it immediately and do not use. Make sure the outside of your cookware is dry before placing on the unit. Water droplets on the outside of your cookware may begin to boil and spatter.
Non-induction cookware cookware with a diameter of less than 12 cm (4 ¾“) ceramic, glass stainless steel, aluminum, bronze or copper unless it is specificly marked as suitable for induction cookware with feet pan with rounded base (an uneven base such as a Wok) Please only use cookware marked suitable for induction.
6E. Operating the cooktop Plug the power cord into a suitable outlet. A beep signal sounds when the cooktop is in standby mode. Place induction suitable cookware in the center of the cooking surface. Now press the ON/OFF switch to turn the induction cooktop on. The control lamp “POWER” blinks and an acoustic signal sounds and the unit will start to work at a default Power stage.
change the settings at any time, ranging from 1-10. LED-display “POWER” appears. • “Temp” (2x pressing the “Function” button) The pre-set temperature stage “120°C” is selected and the device turns on. With the arrow keys, you can change the settings at any time, ranging from 60°C - 200°C. LED-display “TEMP (°C)” appears. • "Timer" (3x pressing the “Function” button) After having selected the operating mode (power stage or temperature stage), press the “Timer” key.
or dirt. In exceptional cases, you may use commercial non-abrasive agents or commercial agents that are used for cleaning the glass top. After the cleaning procedure, you should use a soft and dry cloth to wipe dry and polish the surface. 7B. Cleaning Switch off the cooktop and disconnect the power plug from the socket. At first, you should clean the glass field with a damp cloth or a mild, non-abrasive soap solution. Wipe off the operating panel with a soft cloth or a mild detergent.
! NOTE! For the disposal of the device, follow the local ordinances and regulations applied in your country or region. 9. Warranty Information Warranty of the BergHOFF Induction Cooktop is against defects in materials and workmanship for a period of one year from the date of sale. IMPORTANT!! Keep a copy of your sales receipt to verify date of purchase. You must provide proof of purchase, and date of purchase to obtain the warranty of the unit.
This warranty is valid in countries in which BergHOFF products are sold and void elsewhere. For additional information and other details concerning warranty, please contact our service department at: BergHOFF Customer Service Department, 2323 Merchant Ave, Odessa, FL 33556 or cs@berghoff-usa.com . Worldwide Web: www.berghoffworldwide.com 10. Error code list: – If LED-display shows the error code, please reference to the solution as following.
Induction cooktop Diagram 1 1) 2) 3) 4) 5) 6) Feet Motor Base Control Panel Frame Control panel 7) 8) 9) 10) 11) Glass Thermostat Device Coil Electrical Board Plug - 22 -
Induction cooktop Diagram 2 1) 2) 3) 4) 5) 6) Feet Base Motor Electrical Board Coil Thermostat Device 7) 8) 9) 10) 11) Control Panel Frame Control panel contact Glass Plug - 23 -
Induction cooktop Diagram 3 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) Black glass Frame Control Panel Thermostat Device Coil Plug Electrical Board Motor Base Feet - 24 -
Induction cooktop Diagram 4 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) Feet Base Support for Electrical Board Motor Nut for Control Panel Screw for Control Panel Control Panel Frame Control panel contact Glass slot Thermostat Device Coil Electrical Board Plug - 25 -
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: Read all instructions. 1. Do not touch any hot surfaces. Use the handles or knobs. 2. To protect against electrical shock, do not immerse cord, plugs, or appliance in water or other liquid. 3. Close supervision is necessary when the appliance is used by or near children. 4. Unplug from outlet when not in use and prior to cleaning.
18. Allow sufficient space around the cooking area. 19. Never use the unit on low-heat-resistant materials (carpet, vinyl). 20. Do not place a sheet of paper between the pot or the pan and the unit. The paper may get burnt. 21. Be aware that the unit surface will remain hot for a short period of time. 22. Items with a magnetic field, such as: radios, televisions, automatic-banking cards and cassette tapes, can affect the unit.
4. To select temperature setting, press the” TEMP” button once (defaults=120°C), the temperature light will turn a steady red, and press the REDUCE or INCREASE until the correct temperature setting is achieved. 5. To select automatic timer setting, press the” TIMER” button twice (defaults =0mins), the timer light will turn a steady red, and press the REDUCE or INCREASE button until the correct timer setting is achieved.
