Specifications

Advance Tabco Model: TKMS-304 Item#: 12
SAMPLE HOSPITAL A Page: 12-10
ACCESSORIES
F-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a pr ogram of
improving our products. Therefore,we reservethe right to
changespecifications without priornotice.
© ADVANCE TABCO, DECEMBER2007
SMART SINK MODIFICATIONS&ACCESSORIES
____ K-23 Welded Set-Up/Crated
____ K-24 Shell Crating
____ K-37 Anti-Siphon Vacuum Breaker Holes
____ K-57 Welded field Joint
(Welded in field by others)
____ K-77 Splash Cutout (Pipe Chase)
____ K-106 Mirror Highlite Edge for Sink
____ K-440 Waste Trough furnished with a 2” deep removable basket
____ K-447 High Backsplash up to 18”
____ K-448 High Backsplash up to 13”
____ K-450 Extra Drainboard
____ K-451 Drainboard Corner Turn
____ K-452 Control Bracket 8 x 12
____ K-453 Control Bracket 14 x 16
____ K-454 Drainboard or Sink Sidesplash
____ K-456 Scrap Block Installed
____ K-460 Installation of Disposal Cone with 6” x 9” Control Bracket,
Faucet Holes (
Cone supplied by others)
____ K-460A Installation of Disposal Cone with 14” x 16” Control Bracket,
Faucet Holes (
Cone supplied by others)
____ K-461 Install Collar with 6” x 9” control bracket (Collar supplied by others)
____ K-461A Install Collar with 14” x 16” control bracket (Collar supplied by others)
____ K-470 Modify Bowl Depth
____ K-472 Faucet Hole Revision
____ K-473 Working Height Revision
____ K-476 Punch for Over Flow Holes
(Only)
____ K-479 Undershelf Under Drainboard
____ K-480 Stainless Steel 12” Wide Shelf (min. of 3 ft.)
____ K-489 Provision for Pot Washer (for a “Kewanee” only)
____ K-490 Provision for Pot Washer (For a “Wells-PW-106” only)
____ K-491 Provision for Hatco Heater
____ K-495 Turn Down Backsplash
____ K-498 Tubular Overshelf 12’ wide (min. 3 ft.)
____ K-499 Stainless Steel Pot Rack
____ K-500 Stainless Steel Apron to cover sink bowls
____ K-508 Special Sizing Charge
____ K-510 Prepare Sink for Undercounter Dishwasher
(24” drainboard or larger)
____ K-520 Poly Board Holder
____ K-550 Stainless Steel Tubular Rack Storage
___ K-2B 5/8" Poly-Vance Sink Cutting Board For 14"x16" Bowls
___ K-2C 5/8" Poly-Vance Sink Cutting Board For 16"x20" Bowls
____ K-2D 5/8" Poly-Vance Sink Cutting Board For 18"x24" Bowls
____ K-2E 5/8" Poly-Vance Sink Cutting Board For 20"x20" Bowls
____ K-2F 5/8" Poly-Vance Sink Cutting Board For 24"x24" Bowls
____ K-3 Poly-Vance Cutting Board (5/8” Thick)
____ K-30 Faucet Wall Mounting Bracket
____ K-72 Leg To Wall Brace
____ K-397 Wall Bracket for Regaline Sink
(Must use K-495)
____ K-455A Stainless Steel Sink Cover 10"x14"
____ K-455B Stainless Steel Sink Cover 14"x16"
____ K-455C Stainless Steel Sink Cover 16"x20"
____ K-455D Stainless Steel Sink Cover 18"x24"
____ K-455E Stainless Steel Sink Cover 20"x20"
____ K-455F Stainless Steel Sink Cover 24"x24"
____ K-455G Stainless Steel Sink Cover 20"x28"
____ K-457
Replacement Rubber Scrap Block (See K-456 for install cost)
____ K-474 16 ga., ‘304’ Series S/S Legs with S/S Feet.
____ K-475 S/S Legs with S/S Feet
____ K-478 Stainless Steel Bullet Foot
____ K-488 Flanged S/S Bullet Foot
____ K-493 16 ga., ‘304’ Series Stainless Steel Welded Leg
Assembly with Stainless Steel Feet
____ K-494 S/S Welded Leg Assembly with S/S Feet
____ K-496 Leg Assembly For Grease Trap with Adjustable Cross-
Bracing and S/S Feet
(For Grease Traps with 15" Height or
less. Consult factory for larger grease traps)
QTY.
SMART MODIFICATIONS
QTY.
QTY.
QTY.