User's Manual

38
How to Replace the O-Cap Filter
(for ITC, ITCD, ITCPD, and ITED)
The tool has two ends, one for removal of
the O-Cap (A) and one with the new O-Cap
attached (B).
· Using the removal end (A),
insert it into the opening of
the used O-Cap and pull it out
slowly. Keep the stick straight.
· Using the other end of
the tool (B), insert the new
O-Cap into the opening
and gently remove the stick.
· Discard the tool and the
used O-Cap lter.
BL_ILLU_miniBTE_O_Cap1_BW_Hi
11