Owner`s manual

Mastering

Your

BERNINA

/bernette

Sewing Machines

MASTERING YOUR BERNINA

/bernette

SEWING MACHINE 8/05

Notes

Dealers

Fabric .................................................... lightweight cotton, 6” x 4”

Needle ................................................................... 80/12 Universal

Thread .......................................................................... all-purpose

Presser Foot ........... BERNINA

Standard Buttonhole Foot #3/3C

......................................... bernette

Clear Satin Stitch Foot

Stitch .................................................................................. zigzag

Needle Position ......................................................................... left

Rolled and Whipped Edge

Clean one 6” lengthwise edge of “whiskers”

Select the Zigzag Stitch (BERNINA

SW = 2.5mm and SL =

1mm or less; bernette

SW = 3.5mm and SL = buttonhole setting).

Loosen the top tension if necessary.

bernette

Place cut edge of fabric against

the inside of the right toe of the

foot and sew.

BERNINA

Place cut edge of fabric be-

tween the center and left toes of

the presser foot and sew.

Notes:

- The left swing of the needle should be in the fabric, while the

right swing falls off of the right edge of the fabric.

- As needle swings left, it should roll fabric into a tiny rolled edge.

- The finer the fabric, the finer the needle and thread used.

Trim and mount the sample.

This edge finish is used on a single thickness of fine lightweight

fabrics. It is also use as a seam finish or as an edge on ruffles,

hems, etc.