Operation Manual

42
Screen Calibration
► touch the calibration icon
► another screen appears
► with touch pen touch the center of the cross. The cross
moves to the next position
► repeat this until all three positions shown are calibrated
► touch
to save settings
The calibration screen can also be opened
this way:
► switch sewing computer off (to «0»)
► touch the two needle positioning buttons
on the front panel and keep them pressed
► switch sewing computer on (to «I») and as
soon as the calibration screen is opened,
release the two buttons
Setup Program
032298.53.04_1204_B820_EN