Instruction manual

169
Troubleshooting
̶ Embroidery hoop attached
⦁
remove embroidery hoop
̶ Embroidery motif is partly outside the
hoop
̶ Embroidery motif is too large
⦁
re-position the embroidery motif. The area within the hoop
can be embroidered
⦁
reduce the motif size or attach a bigger hoop. The area within
the hoop can be embroidered
̶ The embroidery process cannot
proceed
⦁
move Mega-Hoop to center position and resume
embroidering
̶ Less free space on the USB stick
̶ No personal data available on the USB
stick
̶ During the update process personal
data was not saved on the USB stick
⦁
delete data from USB stick
⦁
check that the USB stick is inserted correctly and re-start the
sewing computer
⦁
the software was correctly updated. Personal data could not
be recovered
̶ BERNINA USB stick is not inserted
̶ New SW Version is not available on
the stick
̶ Update successful
⦁
insert BERNINA USB stick and do not remove during the
update process
⦁
save the new SW Version on the BERNINA USB stick and
start the update again
⦁
the sewing-/embroidery computer has been provided with the
latest software version
General Explanation Repair
Messages
034247.71.04_2014-02_Manual_B750_EN