Instruction manual

51
Setup Program
Calibrating buttonhole foot No. 3A/Cleaning/Packing position
⦁
attach buttonhole foot No. 3A
⦁
touch «Start/Stop»-button
►
the buttonhole foot No. 3A moves forward and backwards
►
the buttonhole foot No. 3A is calibrated and the sewing computer indicates
whether the calibration has been successful
The buttonhole foot No. 3A is matched to this sewing computer and should
only be used on this sewing computer.
⦁
touch «Calibration»-icon
⦁
clean the thread catcher according to the instructions
⦁
touch «Cleaning»-icon
1 Calibrating Buttonhole foot No. 3A
2 Cleaning the thread catcher
3 Packing position
⦁
touch «Cleaning/Calibrating»-icon
1 2 3
►
if the update cannot be started or if there are problems during the update
process, an error message appears
If the data and the settings aren't on the sewing computer anymore after the
update:
⦁
touch icon 3
►
the data on the stick are saved on the sewing computer
1
3
2
Please find the latest version of Software at www.bernina.com
034247.71.04_2014-02_Manual_B750_EN