Instruction manual

71
Practical stitches
3
1 2
Darning foot No. 9 (optional accessory)
Straight stitch No. 1
Holes or worn areas
«Replacing» threads along the lengthside and crosswise in every material.
Preparation
⦁
lower the feed dog
⦁
attach the Slide-on table
⦁
hoop the fabric into a round embroidery hoop (optional accessory)
►
the darning area stays evenly taut and cannot be distorted
Sewing
̶ work from the left to the right, guide the fabric evenly without using
pressure
̶ move in curves when changing direction on top and on bottom. Avoid
points as this can cause holes and thread breakage
̶ sew different length. The thread is better spread over the fabric
Poor stitch formation
̶ if the thread is lying on top, slow down the fabric movement
̶ if there are knots on the wrong side of the fabric, move the fabric
more quickly
Thread breaks
Guide the fabric more consistently.
Manual darning
1 Sew the first rows to cover the hole
⦁
first rows just beyond the worn area and not too close together
⦁
work the rows in irregular lengths
⦁
turn work by a quarter turn -90°
2 Sew over the first rows
⦁
first rows not too close
⦁
turn fabric by half turn -180°
3 Finish darning the hole
⦁
sew another loose row
034247.71.04_2014-02_Manual_B750_EN