Instruction manual
75
Practical stitches
Top stitching edges
Blindstitch foot No. 5
Reverse pattern foot No. 1C
Edge stitch foot No. 10/10C/10D (optional accessory)
Straight stitch No. 1
Narrow edgestitching
Outer edges
⦁
place edge of fold left against the guide on the blindstitch foot
⦁
select the needle position left in the desired distance to the edge
Wide edgestitching
Material guidance
Presser foot as guide:
⦁
guide the folded edge along the edge of the presser foot
Stitch plate as guide:
⦁
guide the folded edge along the marks on the stitch plate (1 to 2.5cm)
Seam guide as guide:
Presser foot
⦁
loosen the screw on the back of the presser foot
⦁
insert the seam guide into the hole of the presser foot
⦁
adjust width as desired
⦁
tighten the screw
⦁
guide the folded edge along the seam guide
To sew parallel wider lines, guide the seam guide along a previously sewn line
of stitches.
Blindstitch foot No. 5
Needle position left or far right.
Reverse pattern foot No. 1C and edge stitch foot No. 10/10C/10D
(optional accessory)
Any needle position possible.
Hem edges
⦁
place edge of fold (inside upper edge of hem) right against the guide on the
blindstitch foot
⦁
select needle position to the right to sew along the upper edge
5/8
5/8
5/
8
1
25 15 15
15
75
75
5/8
5/85/8
1
25 15 15
15
75
75
5/8
5/85/8
1
25 15 15
15
75
75
5/8
5/85/8
1
25 15 15
15
75
75
034247.71.04_2014-02_Manual_B750_EN