Operation Manual

16
Removing the needle
█
raise needle
█
power switch to «0» (off)
█
lower the presser foot
█
loosen the needle clamp screw
█
pull the needle down to remove
Inserting the needle
█
flat side of needle to the back
█
insert the needle as far as it will go
█
tighten the needle clamp screw
Changing the Needle
Thread Cutter
On the left of the head frame
█
pull both threads from front to back over the cutter
█
the threads release automatically as soon as the first stitch is sewn
Preparation - Sewing
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN