Operation Manual

25
Functions
Quick reverse
temporary:
█
press the button
█
the sewing computer sews stitch pattern in
reverse until button is released (max. stitch
length 3mm)
Application:
█
programs buttonholes
█
programs darning length
█
for switching when in the straight stitch
securing program
█
manual securing (seam begin and end)
continous reverse:
█
press button quickly twice
█
the sewing computer sews the chosen stitch
in reverse
█
press button once to cancel
Start/Stop button
█
starts and stops the sewing computer when
operating it without foot control - the connec-
ted foot control is idle
Speed control
█
to infinitely adjust the speed control when
operating the sewing computer via start/stop
button
Needle stop
Basic setting is needle stop up (arrow points up).
█
press the button
█
arrow points down = sewing computer stops
with needle down (needle in the fabric)
█
press button again
█
arrow points up = sewing computer stops with
needle up
clr» (clear) button
█
press button = reverts to basic settings
█
other selected functions are cleared
Exception:
█
needle stop up/down
█
press «clr» button twice to clear altered basic
settings of the auto-length buttonhole
Letters, numbers and characters (330 only
Block alphabet)
█
press Alphabet button
█
one of the fonts will appear on the screen
█
select desired font by pressing the alphabet
button
█
press the right button to scroll letters and
numbers forwards (A B C ...)
█
press the left button to scroll letters and
numbers backwards (@ Ç ?...)
Alphabet contents
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Ä Ö Ü Å ÆŒØÑÈÉÊÀÂ
01234567890_-.’&? Ç@
Memory
█
press the button 2
█
«mem» will appear on the display
█
the number of available memory spaces
(capacity of 30) and the cursor blink
█
use the left 1 and right arrow buttons 3 to
scroll patterns, letters and numbers
█
use the right arrow button 3 to save
Temporary altered stitch Memory
█
any stitch length or width alterations will be
saved automatically
For example:
█
sew an altered stitch, e.g. zig-zag
█
select and sew another stitch, e.g. straight
stitch
█
return to zig-zag, your alterations are still
active
Return to basic settings
█
individual stitch patterns can be reverted to
basic settings manually
█
all altered settings are lost when the «clr»-
button is pressed or when the sewing compu-
ter is turned off
Application:
█
for all stitch patterns
█
particularly useful for switching between
different applications
Press button a bit longer = the needle will go automati-
cally up or down.
Pattern end
█
press the button
█
sewing computer stops at the end of a single
stitch pattern or stitch combination (in Memory)
Mirror image (right/left) */**
█
press the button
█
selected stitch pattern will be sewn in mirror
image
#-button
█
stitch selection button (see page 24)
3
1
2
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN