Operation Manual

27
Functions
Memory
Opening the memory
█
press the button 2
█
the cursor and the available number of empty memory spaces (e.g. 30)
start to blink, and «mem» appears
█
select desired stitch pattern
█
the number of the stitch pattern appears on the display
█
press the button 3
█
the stitch is programmed
█
the number of available memory spaces appears
█
select the next stitch pattern and program as described, etc.
Stitch patterns, letters, and numbers can be combined and stored in memory
(capacity of 30 spaces).
It's a long-term memory. The contents remain saved until deleted by the user.
Power cuts or switching off («0») the sewing computer for a longer time will not
affect the saved program. The stitch lengths or widths and the needle position
can be changed at any time.
Individual stitch patterns, letters or numbers can be deleted or overwritten.
Memory buttons
█
use the left button 1 to scroll the memory contents backwards
█
use the center button 2 to open and close the memory
█
use the right button 3 for programming the memory and scrolling the
memory contents forwards
Programming Practical and Decorative Stitches
3
1 2
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN