Operation Manual

28
Functions
Opening the memory
█
press the button 2
█
the cursor and the available number of empty memory spaces (e.g. 30)
start to blink, and «mem» appears
█
press the Alphabet button 5 to select the alphabet of your choice
█
the letter A in the alphabet of your choice appears on the display
█
use the arrow buttons 4 and 6 to scroll the alphabet
█
select letter/number
█
press the button 3 = letter/number is programmed
█
the number of available memory spaces appears
█
proceed as described to select and program more letters and/or numbers
█
when programming more than one word, select the underscore symbol (_)
to program a space between the words
Starting to sew
█
press the foot control = the sewing computer starts automatically at the
beginning of a stitch pattern combination
█
select Pattern End as well = the sewing computer stops automatically at the
end of a stitch pattern combination
If the stitch length and/or width of letters or numbers have been
altered, the alterations will affect all of them.
If you only want to alter single letters or numbers, this must be done
individually.
Programming Alphabets and Numbers
The following special programs cannot be saved in memory:
330:
No. 5 Securing program
No. 10 Buttonhole
No. 11 Button sewing-on program
No. 16 Darning program
350:
No. 5 Securing program
No. 10-11 Buttonholes
No. 12 Button sewing-on program
No. 13 Eyelet
No. 20 Darning program
No. 21 Basting stitch
380:
No. 5 Securing program
No. 10-13 Buttonholes
No. 14 Button sewing-on program
No. 15 Eyelet
No. 22 Darning program
No. 23 Basting stitch
64 5
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN