Operation Manual

42
Sewing stitches - Buttonholes
Saving programmed buttonholes in long-term memory
█
after programming press the button 3
█
the buttonhole is now saved in long term memory
Recalling saved buttonhole
Programmed saved buttonholes can be opened for re-use even after the
sewing computer has been disconnected.
█
select the desired buttonhole type
█
press the button 2
█
sew the programmed buttonhole
█
only one length per buttonhole can be saved. Saving a new length with the
button 3 will overwrite the previously saved buttonhole length
Darning foot No. 9 */**/***
Button sew-on foot No. 18 */**/***
Sews buttons with 2 or 4 holes.
Sewing on buttons
█
buttons sewn on for decorative purposes only are stitched without a thread
shank
█
the length of the shank (= thread between button and fabric) can be made
shorter or longer as required with foot no. 18
Sewing on buttons with Darning foot no. 9
█
select Button sew-on program
█
check distances between holes with the handwheel and adjust stitch width
if necessary
█
sew the securing stitches; hold the threads when starting to sew
█
sew program
█
sewing computer stops automatically when program is completed and is
ready for the next button
Beginning and ending threads
█
the threads are secured and can be trimmed
For secure results
█
pull both bobbin thread ends until the ends of the upper thread are visible
on the wrong side (knot if required)
█
trim thread ends
Buttonhole in Long-Term Memory
Button Sewing-On Program
Sewing on buttons with foot no. 18
█
set the shank length with the screw on the foot
█
select Button sewing-on program and continue as with foot no. 9
Beginning and ending threads
█
the threads are secured and can be trimmed
For secure results
█
pull both bobbin thread ends until the ends of the upper thread are visible
on the wrong side (knot if required)
█
trim thread ends
Sewing 4-hole button
█
sew the front holes
█
carefully move the button forward
█
sew the back holes with the same program
21 3
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN