Operation Manual

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
100
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric .................................................... lightweight cotton 4” x 6”
Notions ............................................ 9” insertion lace, ½ ”- ¾” wide
Needle ................................................................... 70/10 Universal
Thread .................................................................. 60 weight cotton
Presser Foot ............................... BERNINA
®
Edgestitch #10/10C
.......................................................
bernette
®
blindhem foot
Stitch ................................................................................ straight
Needle Position ...................................................half left, half right
Lace Insertion
First Run: Pin or spray-baste lace in position on top of fabric. Select
straight stitch; adjust length to 1.5mm-2mm.
From the back, carefully cut through fabric, between the two rows of
stitching, leaving lace intact. Press fabric back against the straight stitch.
Second Run: Select zigzag stitch; SW = 1.5-2mm and SL = 0.75-1mm.
BERNINA
®
Move needle to half left (artista
640 & 730: adjust needle one
position to left). Align left edge of
lace with blade; sew.
Sew the right side in the same
manner using the half right needle
position (artista 640 & 730: adjust
needle one position to right).
bernette
®
Move white blade
1
/8” from the
needle). Align right edge of lace
with guide; sew.
Turn fabric 180° and sew the right
side in the same manner.
BERNINA
®
Move needle to half left (640/730:
adjust needle one position to left).
Place edge of lace first to the left
of the guide, and zigzag over the
edge of the lace and previously
sewn straight stitch.
Sew right side in the same way,
using a half right needle position
(artista 640/730: adjust needle
one position to right).
bernette
®
Place edge of lace first to the right
of the blade, and zigzag over the
edge of the lace and the previously
sewn straight stitch.
Turn fabric 180° and sew the right
side in the same manner.
Trim surplus fabric from wrong side. Trim and mount sample.