Operation Manual

BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
134
Mastering
Your
BERNINA
®
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Fabric ......................................................heavy muslin, 12” x 12”
Stabilizer ...................................................... tear-away as needed
Needle ................................................90/14 Embroidery or Sharp
Thread ..............................................30 weight cotton embroidery
Presser Feet ................................................ Clear Foot #34/#34C
........................................ Open Embroidery Foot #20/20C
...................Sideways Motion Foot #40C (185 & 730 only)
Stitches...................................................................... as indicated
Needle Position ......................................................... as indicated
Function Sampler
Preparation
• Using HRFive spray adhesive, adhere stabilizer to the muslin.
• Mark muslin for eleven rows of stitching, spaced approximately
1” apart. When stitching, align the back of the presser foot with
the top edge of the fabric before beginning each row. Note: See
drawing on page 135.
Row 1
Motor Speed
• Select straight stitch #1; sew down the 9" width of the fabric.
• Touching the Motor Speed symbol or the Slide Speed Control,
change speeds as you sew.
• When stitching is complete, touch the Motor Speed symbol or
move the Slide Speed Control until full sewing speed is active
again. Note: Touching the external CLR button will not restore
the Motor Speed to full; this must be done manually.
•