Operation Manual

Mastering

Your

BERNINA

/bernette

Sewing Machines

MASTERING YOUR BERNINA

/bernette

SEWING MACHINE 8/05 161

Dealers

Stitching Outer Rectangle

• Using a temporary spray adhesive, bond the stabilizer to the muslin.

• Scroll to select the first section of the saved stitch combination.

Activate Pattern Begin and Pattern Repeat 1x.

• Sew; at the end of the stitching, step down on the heel of the foot

control to move the needle into the down position. Pivot 90º, then use

the foot control to move the needle to the up position.

• Scroll to the second section of the stitch combination. Activate Pattern

Begin and Pattern Repeat 2x. Sew; the artista will automatically stop

after the second repeat. Note: When Sub-Divider 1 is used, the

artista will stitch multiples of ONLY the selected section. When the

second repeat is complete, use the foot control to move the needle

to the down position. Pivot 90º, then use the foot control to move the

needle to the up position.

• Scroll up to the first section of the stitch combination. Activate Pattern

Begin and Pattern Repeat 1x. Sew; at the end of the stitching, use the

foot control to move the needle to the down position. Pivot 90º, then

use the foot control to move the needle to the up position.

• Scroll to the second section of the combination. Activate Pattern

Begin and Pattern Repeat 2x. Sew. This completes the stitching

of the rectangle.

Memory/Sub-Divider 1 Sampler continued:

artista 640/730 only